Page 2 of 4 PrimaBefore 1234 LastUltima
Results 11 to 20 of 40
  1. #11
    THE ACTIVE USER L'avatar di Backgroop
    Date Of Registration
    Feb 2013
    The resort
    Oppido Mamertina
    Et
    39
    Messages
    1,146
    Citazione Originally Written by Alfiuccio Visualizza Messaggio
    the radiator for heating the passenger compartment????
    Emanuel claims that the drive part bad cold and has no loss of coolant that centers the radiator heating?
    The patience and virtue of the strong..

  2. #12
    THE AVERAGE USER
    Date Of Registration
    Nov 2013
    The resort
    Udine
    Messages
    103
    try changing the temp sensor water. to me once drove me crazy

  3. #13
    THE AVERAGE USER
    Date Of Registration
    Apr 2014
    Et
    39
    Messages
    95
    cold attacks the diagnosis and see that the motor temperature is read, even to me ? success is the one that says hftdelta

  4. #14
    BEGINNER
    Date Of Registration
    Jan 2014
    Messages
    22
    when you can feel if you place the "starter"?
    if not, as suggested, try to see what temperature the law or if the butterfly ? smeared and at the least can't be open enough

  5. #15
    THE AVERAGE USER L'avatar di Zac
    Date Of Registration
    Feb 2014
    Messages
    158
    hello how many miles has the car ?? for case, you also have the gpl ?

  6. #16
    BEGINNER
    Date Of Registration
    Dec 2013
    Messages
    40
    Coil have you checked also if the hot is good ... as already I have said see the temp sensor. Liquid. . Further test just to be safe? see the compression of the cylinders...

  7. #17
    BEGINNER
    Date Of Registration
    Apr 2014
    Messages
    32
    opened and a beautiful diagnosed with a cold engine, I would check immediately the high-voltage cables, coil

  8. #18
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    Messages
    116
    Then if it is only cold and the machine part 3-cylinder will be the head gaskets in the meantime, check which cylinder is nn and check the spark plug and the compression

  9. #19
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    300
    Hello,
    when the machine turns bad (cold) I have problem of ignition in cylinders 2 3 and 4...... candles had replaced another mechanic, dismantled, checked and found in good condition......the temperature for the sensor I have not checked to? you say that this sensor could cause all this brothel?

    the machine is cold smoke so much, of course, to a bad fuel mixture, there? I can add that up to the machine when not ? hot and you decide to go not good but normal, not loss of strokes, start at the first attempt without effort, but the catalyst ? red-hot, becomes incandescent.
    today we will go ahead.....I also noticed a low-pressure gas, which is the pump?

    Thanks

  10. #20
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    300
    ..... in the meantime, broken cable on the reel,....... let's see if we****!

Page 2 of 4 PrimaBefore 1234 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •