Help pin-out line can marelli mj8f3 fiat ducato 5 series

[legendaryslave]

you are original, but I can not understand how he was able to break the e2p if I couldn't even read it,
however, I now have found an identical prover? to clone it.......

ok let us know how it goes

[ugoboss]

the eye that when you opened it, you can be ruined, these are very delicate and others have had problems and we came back to the ecu.

[alfajtd]

Right.. could be another cause...
After that open the new one, connect it to the vehicle and test...
To open these, they are really disgusting

[ugoboss]

the practice is always the same, you open the ecu the collapse and try if everything is in place, so you do not have my doubt that may have been the fault of the reading or writing.

[alien78]

ok guys, problem solved.......
the first thing I found to a control unit similar only changed the software and the guy who sold it to me as well scodificata partially,so I connected the ecu I did the first start-up and code it ? rimemorizzato then I coded the injectors with drive com and I finally connected the kess v2 I made the id, and this time the file ori was present in the alientech data bank, and then I did the luca stanca and I have written to via the serial port.
thank you all for your help

[carlo abarth]

1544-b236 you could post this file that is read in the kotor duchy in this post??