the council clutch fiat 500 1.3mjet

[cronoprima]

try to spray some nitro thinner inside the flywheel. many times as the other users to recommend, for various reasons, loss,ect ends up oil inside them. see if you find oil stains near or qnd turn on the hot air from the vents out a bit of the smell of oil

[mjet10]

According to me the best thing about and search for something specific and reinforced so as not to have more problems in the future, if you want to make the mod more heavy

[carlo abarth]

if you are looking for on ****** there are millions of companies that make clutches reinforced!"!!

[Riccardo#28]

if you are looking for on ****** there are millions of companies that make clutches reinforced!"!!

exactly, and a search on ****** me, the son made..
it would be for? interesting to understand what clutch would you do in my case (mapping and luca stanca), and of the best quality? of the original, but that does not cost a fortune, that is not too hard to pedal, and that does not tear.
to mount the 1.3 90hp what should I change?
thanks to all for the interventions

[cinqueturbo]

I would say take a Valeo Original in its traditional package or, alternatively, that of the turks in the white packaging,
lance Y1,3Mjet 105hp but it matters little since, and the same as the 90hp and are you sure that it holds..
beware of those box fiat happened to me everything and more? with those..
talking with a friend fiat dealer but said they are of dubious origin..
by comparing the codes with those of the fiat, but it is really fiat do not match..

[carlo abarth]

from the outset that if you take the fiat 90% are regenerated!!!

[munro]

nothing...just the clutch...

[Riccardo#28]

gorgeous!
then gi? a valeo for 90hp should be good?

*munro confirms that it does not serve to change the flywheel and the clutch on the 90hp from 215mm to go on my flywheel?

[mjet10]

Munro are you sure? I do not think that you can put the clutch 90 hp 75

[munro]

I say that v? without replacing anything if it's not the same frizza.....I will repeat the disc 70cv and 200mm 90 hp and d? 215mm..
therefore, strictly speaking, the disk of the 90hp on the flywheel of the 70cv "sticking out" for only 7.5 mm for the side...
however, if you want to be sure just going by a ricambist? and compare the two clutches...in particular, the plateau at ****llo fixing...that will be the same..