It is normal that with the or you recognize the driver, and with the mod no ! The Ecm uses the cks to find the drivers. However, you put the ori select one of the two drivers that you find edit save eprom modified and re-enter safely with the cock I recommend no antivirus
It is not me that he does not contraddirti ! And also I have 3 of cockerels
Last edited by leandro89; 17-12-2013 at 19:48
the file ori gi? bed and preserved .
in the case of block riprogammare bench right?
thanks
I'm with the phone I have no way to see the file now, however, if the proceder? you did and this is what I said, go quiet, it takes a minute to write me then when I work on edc15 me I always do a read of the file ori with mpps ( so much for the things that it takes to read the edc15 it's worth)that on edc 15 and a bomb and raises many many times in the case of block !!!!
You are right to keep it let's say that in the case of the block you reschedule to tour for? the flash in this case am29f400 and with programmer eprom for? as a gi? as I was telling you about .I always sbrogliata with mpps ( I speak always of edc15) those few times that to me ? nailed in writing with mpps after several attempts I shooting for? with the rooster v2 go quiet eye, even if it puts us very little to write, you should always put a booster on the batteries that it never hurts to let me know!
thanks..................
I have read that if the drivers are present in the ecm does it automatically now the situation ? this :
the original
Size: 524288 = 0x80000
Cks = 0x4BA1943
modified
Size: 524288 = 0x80000
Cks = 0x4BA2EFC
the same size and checksum is different.
How do you know when a checksum ? correct?
It was not reported to you eartip ! If you did the driver go quiet
ok...Saturday morning I am dedicated to the programming in the meantime, I'm studying how to map :-)