change the pc maybe ? your inkasinato , exceeds 14 volts of the battery as you said cinqueturbus
change the pc maybe ? your inkasinato , exceeds 14 volts of the battery as you said cinqueturbus
Now I finally dismantled and the link to the bench power supply at 13.8. Stupid question, but I don't have the ridposta. As I send it in boot mode a edc15 tdi ? Goku's gi? tried the recovery by obd with continuous loop. Now I try to tour. Anyway before in the obd gave me no information.
but you remove , you do it in 5 min , maybe you have the flash is damaged . and, anyway, read on, we are curious, or come to me lol
Thanks for the availability? faberecu, but I don't know where to find you :-) anyway I had a similar problem on an audi a5 2500 b6, but he had a 29f800 and was damaged in the writing. I had to replace the eprom. But how can you? damage even assuming to write a file with cks wrong?
I believe that you and corrupt the eeprom ,jokes of mpps that every so ago... and now no te recognizes it,and is not part
you magpro2? with the rewrite sure.. x,' mpps is the ecu id by taking the data from the eep,while the mag2 ago id' from flash
but anyway if the e2p and corrupt, there is little that can be done.. if not a total scod
But excuse the e2p mica is touched in writing
well the mpps to tour the recovery, re-wrote the file ori and now enters in the diagnosis, also with the vag com and I ecu id.
You have told me that the cks of the file that I posted ? correct therefore? I can write it, now I try and see what the sata out.
here we are then mpps v5 writing executed perfectly . I have tested on the bench also diagnose with vag com all the regular. Before writing, I re processed the file with winols 2,24 in order to be sure of the cks and ? everything went ok. tomorrow morning I try on the machine. thanks for the advice, I still have the doubt of how to put in boot this blessed edc15 and also the fact that the block can be occurred due to some interference of the ecu board saw that the car does not ? this that blessed fuse 11. c'? to say that mpps if I do the edu id, it asks me to remove the fuse instead, if I open the protocol and tell them to write without making the ecu id is not me say so, I guess there is the bypass security acces.