map Audi A6 2.5 tdi 180 hp rotary vane pump

[tidus1985]

for advances do you mean the various iniez zoned "the names of the cabbage ecm" from the curves I was pretty sure that they were advances, I also did this test, map with advances ori, but I can't honestly tell if you don't touch any of the limiter, and if the map diesel is in fact the map to the 06E7CA and later 4, then c'? also the map the pedal to 06DFCE that the mapper had not even touched on, there are a misery of maps iq between various maps to a minimum, at full load, I think that do not serve tap those for the performance

[munro]

them controls all of the pump...the inniettori are mechanical....

[munro]

on the car with a rotary pump that you have to be also attentive to the map voltage pump....

[Alfa159 q4]

It's up to lim torque, pedal and turbo and test

[tidus1985]

you I noticed at my expense on a 110cv.... at 3800 rpm cut, the map voltage too high

[munro]

if you exceed a tot...
cutting....

[tidus1985]

now I prepare the map, the place, and tomorrow when I go back in the workshop I call him and I do come ae we riprovarla

[munro]

the same thing happens with the voltage the solenoid advances in pump...

[tidus1985]

here I try tomorrow so, map the pedal, 3lim of torque and the turbo, see if it goes

a question, the map inj zoned that is, the map diesel, has in the y-axis spins, and in the x-axis, mm3), and in the values represents the vopltaggio of the pump right? it seems to me that the threshold is 8500 or 9000 I don't remember, the stessop applies to map the pedal if I'm not mistaken

[munro]

I've written a map but I wanted to say a maf that air the mass air flow sensor.....