Pin 9 of the micro I imagine that the instructions you have not plugged in and that you have not made a mistake in the choice of the micro-to-read, with the upa my friend has not had any problems in any case, if you want I can send the ecu you only pay for the transport to the scodifica you do it for free hello let me know
Thank you so much for the availability, but I wanted to try ( and maybe succeed ) I.
The pin 9, you have to raise. I connect it as he tells me the manual of the x-prog
The exact hello and good job
from personal experience I can say that if you want to read with xprog do before I desolder
I did the test to unsolder the micro, but nothing to do. When I do Read/ write always gives me the error. If I try more? times can you read a file incorrectly
for these ecu c? a swap file, use a 27c512 with this file, the balances on the ecu then feeds the ecu for 30 seconds dissaldi and re-mounting your original eprom, nothing more? the code you put only remove the lamp failure immo on the instrument panel
You speak of the files of the clock? I hadn't thought about, but I don't trovavouna memoriaa available. This file is valid for all the 16f? They told me that it does not always work.
passes in the presentation section, first write in the discussions, as well? you knowOriginally Written by ahmedadel
make sure to check the links
I explained that the instrument should be made of the scodifica?
Write permission
Quote