Problem Smart 800

[giuseppe1374]

which diagnosis do you use?

[tt225]

I agree sensor turns , not always from errors in diagnosis

[freddyecu]

Autocom... Release 1, 2013... Problem solved was the rpm sensor

[gcmotor]

When you are not part of the test to connect the diagnosis and controls the number of revolutions if salt. if it remains at zero, change the sensor for sure ? what is the fault

[gick]

when you link a diagnosis to a car in addition to the errors, you also have the chance? to see certain parameters, including the number of revolutions of the engine which are derived from the information transmitted from the sensor. With the diagnosis in the parameters if you have not already? selected in the log (the values that you can select to keep under control) selecting the number of turns, and while you try to do start-up watch in the diagnosis if the number fluctuates with a value different from zero or not, sometimes when you are not part of the pu? also be the phase sensor.

[faberecu]

on the smart often damages the wiring where the curve behind the seats , sometimes stops , check from the motor to the door relay under the seat guide

[cicciocar]

100% sensor rpm

[nerone]

to me ? often happened that I leave for the fault of the sensor and nndava errors in diagnosis... replaced the sensor nn ? pi? the problem