Doubt Egr Audi A6 3.0tdi euro5 year 2009

[danny677]

At the time I left all the com'?, to his request to have + readiness at the low I coded the function hidden in the MMI "auto"+"comfort"+"dynamic" and on the latter it seems happy.
for the egr, maybe we will see later on if I leave it a few days I close it and if you do not clog nothing for him to leave it closed, otherwise I put back all the original..

[Sbymotta]

I have an audi Q7 with Egr closed and fap to her place and that's fine, I never had a problem.
P.S.: I could explain better the encoding of the function hidden in the MMI "auto"+"comfort"+"dynamic"?
Thanks 1000 in advance

[danny677]

thanks for your contribution. the function ? to enable with vcds ( cable + software ) . now I'm out, when I get back if you want to place the sequence of operations necessary to enable it. on a6 and a5 ? worked fine on mmi 2g, both for the engine response, steering tension.

[Sbymotta]

I look forward to your news.
Except

[danny677]

the first step ? to enable via vag the hidden menu by following this step :
FOR MMI 2G VIA VAG:

[07 - Control Head]
[Adaptation - 10] -> Channel 8
change 0 to 1
do it

Reset mmi
then :

Voice activation Audi Drive select individual in men? CAR MMI

1) Log in men? secret of the MMI (setup button+car and hold for 5 seconds) enter in Diag Setting, Car Maske, and check the voice, the Charisma (could also be gi? checked) confirm with Accept changes and return back with return.

2) Always from men? secret access APK Ox1...etc.. and check the voice, Charisma and confirm your selection with Accept changes.

3)Reset the MMI (simultaneously press and release the select+wheel+button top right near the retella).

At this point in men? CAR you will find the option of the Audi Drive Select Individual, but not to sar? still accessible, why? you have to enable it from the vag :

Programming the function for the activation of the Engine functions and Steering are the options that I often find on the audi with manual transmission )
The Bits start from the left relatively by the number 7 and I 0
Bit.........--> 00000000
position--> 76543210
if you want to change the BIT 2 and 5 have the following result: 00100100

1) Log in with the VCDS in “09 Central Elec” and go into the Coding -> Long Coding Helper ( Remember that the bits are 0 to 7, starting from the right to the left (as 10000000, bit 7 = 1)
Change the following Bytes as follows:
Byte 7, Bit 5 changes from 0 to 1 (if it does not also change the bit 2 from 0 to 1)
Byte 8, Bit 1 changes from 0 to 1 Servotronic in MMI
Byte 8, Bit 2 changes from 0 to 1 Engine in MMI
Byte 8, Bit 4 changes from 0 to 1 dynamic Steering in MMI
Byte 17, Bit 7 changes from 0 to 1.

2) Always in the 09 Central Electr - 16 Security Access-enter the access code ( search the internet on where and how to find it for your model , on the A5 and some of the a6 ? 20113) click on "Do It!"

3) Always in 09 Central Electr - 10 Adaptation change the channels 63, 64, 65, 66 changing the original values with 4 (Individual) click on Save (one channel at a time).

exit from the vag
reset mmi
you will find in the menu car function "audi drive select"
hello

p.s. on the specific forum you will find several info and related material

[frantik3]

I disattiverei only the flow reduction valve and maybe egr and a light map just to make it a bit more? lively

[danny677]

if flow reduction valve do you mean the swirl I find + appropriate to leave them as at low revs the dann? a pinch of reattivit? in +, ? the egr valve that creates their damage, km after km, making them always work with the + difficulties? until the breaking up of the actuator of plastic that controls.
for the map + lively we could not agree more

[frantik3]

if flow reduction valve do you mean the swirl I find + appropriate to leave them as at low revs the dann? a pinch of reattivit? in +, ? the egr valve that creates their damage, km after km, making them always work with the + difficulties? until the breaking up of the actuator of plastic that controls.
for the map + lively we could not agree more

if you know how to make the map more? lively you also know how to make them go without the swirl I disabled many of the mapped and the customer has feel much better at the bottom, who knows why?!!!!!

[rebirthafterrevenge]

if you know how to make the map more? lively you also know how to make them go without the swirl I disabled many of the mapped and the customer has feel much better at the bottom, who knows why?!!!!!

Considering that this is never the one that after the swirl disabled complains of the lack of power .. com the original map!..

[frantik3]

Considering that this is never the one that after the swirl disabled complains of the lack of power .. com the original map!..

exact with the original map