sorry, I can't download the file, but if you tell me that the ecu talk
sorry, I can't download the file, but if you tell me that the ecu talk
edc16cp34 audi a6 3.0 233cv sw 1037381388
e-mail your file reading bdm.Originally Written by Mr.Flash
ugo ---- president A.E.P.
rewriting the original file full BDM , the car is fine and not c'? no error U0301 software incompatibility...... the problem only arises when you go to edit something in the flash....... and then c'? to write it with a modified version
then I am led to think that the problem arises from the interface.... that fails to correct the checksum, rather, to an error in the file bdm original , as the latter goes well.....
the need? for? was to modify the flash (fap off)..... and there ? been possible to date to do so without falling into the error U0301 incompatibilit? software.
it seems strange to me that both the bdm100 is the ktag wrong the cks, and strange also that you are not able to read it with strunenti different and even golds, have you noticed if the ecu had already been opened.
ugo ---- president A.E.P.
you are right, and the cks!!! happened to me as well
ugo hello and thanks for your interest. the ecu definitely had never been opened, I open myself for the first time.
from the obd ? was able to read it , the cock gave me error in the initialization phase, write (set-up speed? communication) and the mpps original and updated him in the initialization writing gave error. I turned the log to the technical support and according to them it times out the ecu , but honestly, I don't think , or anyway maybe goes in timeout, why? not c'? proper communication. You are brought the most to think about a problem in the line can.... but I could be wrong.
Any other ideas?
oh, really , then, is the explanation we have to be able to give it to us......... how have you solved it ?
Last edited by leandro89; to 15-02-2014 11:18
mpps nn reads and writes to this ecu ? also happened to me, made with gallo 2 and removed the dtc.
evidence there are so many, you can write the backup and then if all goes well rewrite only the flash ori and see if you get error, if all goes well try to edit a map in case I don't know injection and write it down if you get error, you can try to write the rest of the backup and see if it disappears, and, of course, every time you are finished writing, check the cks, and, of course, you have to be sure that the flash is gold, I asked you if you could post up so as to control it.
ugo ---- president A.E.P.
I have also tried with gallo2 , it gave me error (obd) and he didn't write. I made it with BDM , but every time I write the flash I turn on indicator light (mil with error U0301.
When you say you removed the DTC , you mean in the table you have completely eliminated the dtc ??? Then you had the error U0301 software incompatibility ?
I only rewrite the flash changed............. ERROR U0301
I only rewrite the original flash............. ERROR U0301
I've rewritten the bdm backup original............ IT'S OK
The flash ? ori , the exhaust from the usb pen drive and the place immediately.
Last edited by leandro89; to 15-02-2014 11:18
Write permission
Quote