**** sent
"I mean that the FGTECH by OBD reads the MPC from 512Kb if you're using BDM CMD you have to adapt the length to 516Kb, thou, and what will you write?
**** sent
"I mean that the FGTECH by OBD reads the MPC from 512Kb if you're using BDM CMD you have to adapt the length to 516Kb, thou, and what will you write?
Last edited by msport (exil77grande); 03-07-2013 at 16:02
I fgtech3 v53.but the dv write bdm?but mo I have another question...can never be that the giulietta in the obd nn the law?edc 16c39?
Just write it directly by OBD or Bench with the FGTECH cos? you did not need to trim the file and adapt it,
About Juliet might not have the K-line wired , the identifiers you can get them?
no, not even that...
What not even that?Originally Written by crteam
even the data you see...you what model you have of fgtech
It probably has the K-line wired try to connect it directly to the Pin25 of the control unit
you do not have the mpps?if you go quiet!!
I think you guys are in contravention of regulation 1, the original files should not be posted in the discussion but in the appropriate sections of the 2 does not ? can download from the forum until you reach the 80 messages take a look at the regulation in order not to incur in calls
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
starting from the fact that I legend with regard to the rules of the forum,in the second place, you see that does not work the cock,the giulietta have all the line k wired
GALLO ORI + KESS V2 ORI
Write permission
Quote