dpf off.... problem diagnosis...

[SandroMarciano]

I think it can be solved, euro 5, I blocked the increase of clogging in this way, search on damos, and apply them to your file the increase of clogging due to the distance travelled and the time, you'll see that the blockage does not move the most?...

[david]

thanks..
what you say sandro relates to the clogging..
but the fact that I read the state of the filter (regeneration aborted) and a result of clogging.. or and another say "bit" to bring it back.. it says " ******" ??

[oakley1]

If I can put the screen to reset the clogging by 1000% 0

[SandroMarciano]

I think that it depends on the percentage of clogging, and as soon as the ports to 0 you should go back to "clogging normal".

[david]

thanks a lot .. I will try to find them in the damos...

for the case.. address.. (approximate) and in the area... 1E.....?
thanks again

[SandroMarciano]

search in the area of the map of the particulate matter remained if the regeneration is interrupted ? a map 8x8 if I remember correctly, that applies to both ecsafe, in particular, you must watch first!

[david]

hello sandro.. you mean this photo??

ddd.jpg

this and the processed file with ecusafe.. compared to..

while on this photo.. and the comparison with an edc 16 150hp without dpf.. (alfa 147)

111111111.jpg

what change your advice??

so let's say this is for the term (regeneration interrupted).. I miss to find... that of clogging.. (or the same?)

[SandroMarciano]

That's fine, if you go to pi? back you find the single bit that increase the percentage of clogging in the base at the time and the miles

[david]

you mean these??

ok.jpg

[SandroMarciano]

No, they are ir? back, but I assure you that if you don't open the damos not find them...