Problem reading the ecu edc16c2-9-9 with gallo V2

[ecucilacunta]

Hello, I have an aftermarket stereo???if you try to disconnect it and then read the ecu

NOT all original? has the sesore of the gears of the gearbox in this. Could this be?

[maxsek]

you have said that ? a rooster clone???seen that ? a edc15c2 sure your cock has the k line nn v?......you have made other k-line???

[ecucilacunta]

I solved it by reading in the bdm. Also the Alien does not explain the problem. In k-line does not read and does not write. The flaw in the bdm and go quiet. If the car ? the original, if you can post the file in the section dedicated would you do what is pleasing.

[ecucilacunta]

I am saying that with the equipment at my disposal I was not able to make it through the diagnostic port there? it does not mean that there are no tools that can do this job. Maybe someone with more? experience can? advise you better. Anyway a piece of advice that I can give ? if you need to buy some tool to work with the ecu, please contact the shop of the forum, they try everything and in the pi? they give you assistance. cease and desist from chinese sites that tell you they are functional products, most of the times are real bidonate.

[ecucilacunta]

With regard to the bdm, is to open the ecu. Don't worry about it ? a job cos? as complicated as it may seem. Of course you have to have a little bit of the equipment(a tool that does the bdm, dima, a little bit of patience. However, you are in the right place to find all the information you need, then test you.

I have not had time to delve into, but it might be a case isolated to my car. These cars have electronics that leave a bit to be desired, I think you did already? realized, even as a diagnosis outside of that of the parent company only bosch is able to enter. For this I suggest a job in the bdm. At worst, you get a full backup of eco. Cos? if malaguratamente you fail a write you can save the eco and also the one that you cut your wife.

[ecucilacunta]

The powertec ? a great tool, but let me express a personal opinion, I have a galletto v2, and with a tool I do both obd that bdm. There I was struggling a bit to get it to work but in the end I am satisfied.

[msport (exil77grande)]

I know' , it will be very good but given that I'd use it only once, maybe it is better that I support one who does' given the cost

hopefully someone knows if the powergate you can

in your presentation I have written what and how to do to solve the problem.

[msport (exil77grande)]

I would add that I sent a **** with the request file , let me know hello

excuse me as *****? the other day or today? at the moment I don't have any of your *****let me know hello.

[msport (exil77grande)]

yesterday , you cross-reference

ok received and responded to.

[ducati83]

guys I hook up to this post in order not to open another...I have the same car but in 2002, can you tell me if this is edc15 and in the case of which?
do you have any tips on that?
thanks