Info for KM on the framework Audi a4

[legendaryslave]

type nyo or the tachosoft

[magi1984]

the number vag ? 8E0920 901H
and the car is not ? surely, 2002 as ? a 2.0 TDI edc16u31

[egs]

Yes, 24C08....*****s, for sportknight, this is not an ecu but a framework for tools....

[legendaryslave]

nothing even with that number vag that is carried in the port list of a 24c08

[magi1984]

but in your screen there? the final 901H, c'? 900H and 901P. however, do not ? a problem, just takes me to the other picture I invert the eeprom and I should have fixed it
you do? know

[sportknight]

Yes, I was wondering in general

[magi1984]

then I update it, I swapped the eeprom in the pictures, the car ? the game, but I have two problems

1 - The 4 arrows are continuous
2 - In the display of the picture ? pop-up the words SAFE and should not be pi? via

do you have any advice?

[batt.1]

Hi Magi , the machine does not recognize the key code is very likely to you need to recheck good welds and the location of the eeprom. I advise you to always work with eeprom test and not on the original ones , forgive eeprom on the original painting, and detects whether there have been changes, making sure that it works "everything", then review the eeprom (copy) on the new framework of course, the battery should be disconnected before but if not,' the comfort control unit detects changes Can line

[magi1984]

thank you, the problem was just in the welds of the eeprom, there was a pin that was not making contact. rebuilt welding it all works

[savek]

I'm curious as to what that type of sw do you use?