For curiosity? matech what you did with the reading of the EDC7UC31?
For curiosity? matech what you did with the reading of the EDC7UC31?
what they do with the original tester ? independent from us? that happens on the ecu, if the disable option plan to raise the maximum value to a value that is not reachable it will have? always act on the maximum limit set...another thing is instead done to the switch software...but before drawing conclusions, without official information, ? need to do the tests.
it would be a great thing! thanks
Ah, sorry, I hadn't read the second page:
Galletto official, for me, has read and written without problems from a serial port.
I gave a look but I found only one point to 9000, you jared you have the file of which you spoke?
what is pi? simply look for the bytes indicated ?
- open winols
- drag the file to your half on winols
- prizes 2D in the bottom left window of the file you just opened
- on the toolbar, press the button to 16bit, 255, and hi-lo
- press ctrl + F, select in the top of the first tab : decimal
- in the empty field write 9000 and press enter (the cursor will go? the first value is 9000 which is on file from the starting point of where you put the pointer on the file)
- skip the values of maps or curves, and continues to press ctrl + F enter until you will find one on one, the 4 bytes of which I spoke to you
No I have not why? I was confusing, the whole speech that I had made was about EDC7C2 eurocargo €3Originally Written by matech
I had tried using the search function of the ECM, and is only a byte according to me plausible on the file that I posted, that is 1F07E6.
someone said that it is located in the micro ? true?
the bytes to 9000 are 1C3C90, 1DA1D6, 1F07E6, 1F4E38
try them one at a time to lower it to 4500 and see if it works
the limiter of speed? ? always in a flash but sometimes it is also found in e2p, then ? need to do tests to see...often the value ? in the clear, but also happens to find it is encrypted on the flash on the e2p
therefore the diagnosis official working on the flash??
I would not like to work on the framework eprom, and then l? it remained a limiting value!
let? evidence: according to you, the risk of planting the ecu doing these tests in serial? I have made the bdm for the amount of work that entails....
if you have already? the fact of the previous tests go to good end, what? with the ecu is not there, why? should there be any problems with these bytes?
Write permission
Quote