my first map...what do you say?

[magi1984]

you forgot to edit the map, similar in enrichment and acceleration
for the rest it still is not there we are on the limiter rail. the increase in ? totally different from the one given in the map rail pressure
in the map rail pressure have you given 5%, in limiter you gave from 7 to 4%, because????
if increases of 5% and limits with 4% of something is not good...don't you think???
and why? you have halved all of the increases in enrichment, acceleration, injection split and torque limiters?the values of the first went well

[tuommo89]

then I can increase all of the 5 instead of 7 to 4? or do I always have 3 zones and do in percentages ?

[magi1984]

if you want the map rail pressure increases in all of the 5, in the pressure limiter do the same, or even better if you increase 6%
just use a p? of logic,? the speech that you said before. if from a pressure in the map of 1670bar and the limits to 1650 is not good ? obvious

[munro]

http://www.professionalchiptuning.ne...-pure-su-edc16

[tuommo89]

guys here is the modified file from scratch according to your information

[munro]

but that sw editing do you use???with titanium, I see that you have cleared the entire file to the mod compared to the ori......

[magi1984]

heheh....not s? what are you combined but has reason munro, you've CLEARED the whole map! it would be better to double check the files before posting them on the forum

[tuommo89]

I have the program ecm tit 1.61 ke nn going so well...now take it off and reinstall it !!! =) =) grrrr

[tuommo89]

guys I open it quietly...stored and see if you can see it well =)

[magi1984]

we are not there yet with the pressure of the turbo...
you gave increases ranging from 7% to 4%...you could safely give 7% in the whole of the affected area
and the limiter pressure turbo you have given an increase of 6%

not good...if you increase the map turbo of 7% and the limiter 6% is not good, ? the same address of the first
try to understand the values of the tables and use logic, not to give increases in the percentage without reason