I know how to put almost all the emulators,if I remember well, the time f? I also saw the outline of how to do it if I find it posto...su the map I've never tried it, we hope that some of you have had to deal with this problem .
I know how to put almost all the emulators,if I remember well, the time f? I also saw the outline of how to do it if I find it posto...su the map I've never tried it, we hope that some of you have had to deal with this problem .
[COLOR="#FF0000"]There is a driving force stronger than steam, electricity and atomic energy: the will[/COLOR].
[COLOR="#FF0000"]personal Opinions, for educational purposes only.[/COLOR]
the problem of the emulators ? the system must be functioning and trouble-free, otherwise you can't? mount
and often the cost and effort to repair these systems ? very high
the ideal would be to exclude the system by modifying the file sops and load it with "sdp3" (diagnostic software official scania)
that clone made in china it costs an eye
? its a big problem, even why? when these systems are in failure of the engine power is reduced to 30% and on a vehicle that weighs 40ton means to stay locked
in the pi? the forces of order have a chance? check to see if the scr plant works regularly through the code information generated from the engine control unit...
not s? maybe too much to ask
a better form, and we will leverage the thought and the customer will pay for the repair first, and the form then
the miracles, you can't make!!!!!
I do not think that the emulator needs the operation of all components of the scr.....
many evvero that by mounting the emulator you can? to do any less to fill the tank of adblue why, precisely, the device emulates the ecu-the operation of the system...then you could delete all of the scr including the tank,pump,injector,probes, etc..... and the ecu would not realize it in the slightest,much less the FdO,because, precisely, the little box that simulates all st? working in accordance with....
A rider does not create queues even in the car...
a automoblista create queues even on a motorcycle...
from what s? emulators alter the signal from the sensor of temperature of the catalyst so as to never reach the operating temperature required for the chemical reaction, and is not injected, the urea as it naturally happens in cold countries
during the start-up, the system performs a test of the operation of the system to check for any problems with the emulator connected
I know this system, but may be in circulation, there are others definitely
I do not think that the scr does not enter the function only because the probe of the kat does not come up to temperature....
also because of that that's? I the ecu crosses the data of this with the various sensors temp,engine temp, intake air temp, exhaust gas, etc......
and if it detects that everything and in accordance with, but only the probe kat ? the cold definitely give? a dtc.....
A rider does not create queues even in the car...
a automoblista create queues even on a motorcycle...
I would have used an emulator, and I can confirm that this works only on the temperature sensor upstream of the catalyst, and from what I understand does not ? a resistance is put in series with the sensor and feed to the ecu, and on all scania vehicles with the exception of the 730 you can? delete cos?
and the consumption of the urea ? firm
as soon as I can load the schema, and the resistance to assemble for the start-off of the scr
ok igor, I would need the schema can you post it?
hello alien to the scheme can't find it for? I can tell you how to do it:
disconnect the temperature sensor upstream of the cat, then it creates a link with a resistance of 1250hom between the positive and the negative, and then reattach the sensor after this link.
basically you'd need to add a resistor in parallel to the sensor
Write permission
Quote