thatÃs not a problem, but this problem is only with two opel..
or a doblo with 300,000 km of mapped defapata and should be a wonder,
a point 2 series with 220-240 of a policeman and goes better than a grande punto 90hp
or my barber with GP 60 thousand that fredo seems to be the administrator of my grandfather, but for the rest there are no problems..
Booo....
if the saw my cinquino we are definitely in the zone.....
are among Angri Scafati...
I also have the same problem with two opel 1.3!! but for the moment I have not had time to devote myself to solve! I have a combo that cold part is good and hot is the idiot, and another opel that is not good in all cases! what a story!
good evening to all!!sorry, I know this post is old but I was reading and or the same problem on a opel corsa, I was wondering, you have solved?and how?any advice? thanks!!!!!!!!!!!!
Hello Alfetta..Originally Written by alfetta80
Solved only in part..
replaced starter & battery (starter motor new heavy duty battery fiamm from 70A re-made cables connections masses and positive,
improved by 30-40% but I am not entirely satisfied...
if you gave a finger tip at the time you rendevi account if the problem was actually the starter motor, surely not ? for a solution, but a "patch" to the problem, for? focus the attention on the injection...
The problem is to maintain a speed of thought is faster than the speed of the machine
A beautiful, revised to the injectors and pump control hp.
thanks for the reply guys!!!
the battaria and motor are ok,the diagnosis engine revs ok,low pressure and high pressure diesel ok percentage of apertuara drv ok,egr closed,I can get a good start only down side is that the water temperature sensor:in practice, by unplugging the temp sensor to the ecu gain quite a bit and the car starts!so according to me, or do I revise the injectors or increase the torque at start-up from the map, but this I can't!you know something??
not being able to modify the mapping you can? insert a resistor of about 500 ohms in series on the water temperature sensor.
hello sergiot!!
this solution usually I do it myself when I am not from the map, however, you are a customer, a bit delicate and the car purchased by a little so instead of shred I would prefer to get it from the map is one thing that is a bit more clean!
or asked around a bit and you can' do I need to send the ori and I change the comparison to a review injectors, I think that is to be evaluated!we see a bit that says to me,!!!!!I think that the solution to the point I have three resistance,the map, or review the injectors!!
when I happen on bosch type the last one I did is a multi-edc16 by changing the torque at start-up should be that it is a beauty but them, but I find with the driver is as simple as that!
dvdtuning but with those who celai
if celai with me to see that it is not, or said to have solved anything...
and gioe get a fiat, a bomb..
the drop 30-40% of start times, and you realize what I'm talking about..
test the map it or made but the net improvement, not it or seen..
with regard to the tests made, I would only like her on fire..
and s? I had a way to send the machine to resolve this problem the canvas, I'd send it gladly,
but trust me, we would lose only the time..
and five, I recommend that you do checks and tests that already? done..
I say re-read the whole post..
and I hope that does not happen a ce..or of the genus in the workshop..
Write permission
