in fact, they have a white glue that seems to cement .. the last one I opened, we took the excavator!!!Originally Written by rego88
in fact, they have a white glue that seems to cement .. the last one I opened, we took the excavator!!!
What is a hare? A rabbit Abarth
The reality, as always... don't say stupid things... they carcasses in the sheet as the open bends as the stagniola.... automatically bends the pcb, and then throw in the bin!!
Clone is not anything ?
a method which is the safest place for what could be??? without creating damage to the internal card of course
Damage to the card not create,but since the housing is of a very soft material
For forxza what a little ruin,in the sense you see ke and was open...
Whoever said that doesn't make them? I made one last week in the obd. My ? v53 is virtual read makes you save the coding injectors and then the write with no problems with chcks automatic writing
If you want to open it you have to build a kind of template, which allows you to bullonarla the same using the holes in the ECU, and then slowly warms up and begins to open up.. All this not to flex the pcb, and ruin me, or can the cover
The MJD8 not screws.
The pleats of the tabs pressed..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
I speak six bolts to anchor it to the body of the machine....
both kessv2 gallov54 do it without problems on the serial line, for reading the virtual files are located up at the beginning of 2012, then you can have them to those who have access to the data bank of some tool, the official, open the ecu ? quite difficult for the rear tabs say but paying a lot of attention you can do it without breaking any tab
Write permission
Quote