first steps on the ecm

[giobarbone]

I can see no I have the 50 mess :-(

[mecdoc]

true, I hadn't made the case

[giobarbone]

nn you can explain in words??

[Team elettronica]

by it's very easy!!! you have given an explanation quite exhaustive and try again!!!

[giobarbone]

I did it...I was that I couldn't...
now comes the fun part...then following the manual of the program says to do
- Select the cells from 700 to 4500 RPM, and from 40% to 100% of LOAD.
- Increase of two points.
- Select the cells from 700 to 4500 RPM, and from 45% to 100% LOAD.
- Increase of two points.
- Select the cells from 700 to 4500 RPM, and from 50% to 100% of LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 55% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 65% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 70% to 100% of LOAD.
- Increase of two points.
- Select the cells from 700 to 4500 RPM, and from 75% to 100% LOAD.
- Increase of two points.
- Select the cells from 700 to 4500 RPM, and from 80% to 100% LOAD.
Ecm2001 from a To Z - v1.0 - Page 14
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 85% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 90% to 100% of LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 95% to 100% of LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 100% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 4500 RPM, and from 80% to 100% LOAD.
- Increase of two points.
- Select the cells from 700 to 3900 RPM, and from 75% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 3300 RPM, and from 70% to 100% of LOAD.
- Increment of a point.
- Select the cells from 700 to 2800 RPM and from 65% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 2400 RPM, and from 60% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 2100 RPM and from 55% to 100% LOAD.
- Increment of a point.
- Select the cells from 700 to 1800 RPM, and from 50% to 100% of LOAD.
- Increase of two points.
- Select the cells from 700 to 1300 RPM, and from 45% to 100% LOAD.
- Increase of two points.
- Select the cells from 700 to 1000 RPM, and from 40% to 100% of LOAD.
- Increase of two points.
- Select the cells from 700 to 1000 RPM, and from 50% to 100% of LOAD.
- Increase of two points.
- Select the cells from 700 to 800 RPM, and from 60% to 100% LOAD.
- Increase of two points.
- Select the cells from 700 to 1100 RPM, and from 80% to 100% LOAD.
- Increase of two points.
? right??
works of sn other methods?

[msport (exil77grande)]

make a map with this guide, and not just try the machine go straight to the old iron haahha,try and mail you will see that mostruosita'.

[giobarbone]

and then cm do??anyway, to the max sn 14 points

[giobarbone]

anyway, I did just copy and paste from the pdf of the manual here

[msport (exil77grande)]

I'm sorry, but you ask an on-line course explained on the forum,begins to take a cue from what was done on your own and talk about the map for the map.

[giobarbone]

then you ask me to do simulations and post them??
I want to learn before making a mess