Thanks cawadany in the evening, I do the whole thing and tomorrow I will do also the outcome of the test. Then I copy your mod to the file read in bdm and write it directly in the bdm right?
Thanks cawadany in the evening, I do the whole thing and tomorrow I will do also the outcome of the test. Then I copy your mod to the file read in bdm and write it directly in the bdm right?
Yes, I would do directly in the bdm.
Guys I removed the Ecu and before doing so I did the reset of the parameters of adaptation particle filter with a diagnosis BrainBee, however, is giving me as error message, "procedure aborted by the engine control unit," if I go poo in control parameters(the few that I related to the filter this diagnosis) I see that the amount of soot present in the filter has not been reduced to zero,and indeed is now in 80g while before they were 60...instead, it was brought to zero, the parameter relating to the fuel consumption since the last regeneration successful. I tried with texa but I do not activations, perhaps because it was not up to date. I try, however, to write to the ecu later, or say that that parameter must bring the first to 0? Experiences in this regard?
Strange that you are not able to do the reset..... it would be better to have them in order to avoid possible problems....
I just put in the bike and gives me an error "power management" which are, however, able to remove...the drive pero it still has the dpf fitted,I would keep some on the bike and I can see how on the leads and remove. Now in diagnosis the sensor differential pressure remains at 0 as if it had been disabled
Ok let us knowOriginally Written by giuseppe89
What's new? Keep us updated...
Hi guys I couldn't access the forum, however for now no error and everything is ok,I delivered the car and in a few days you should riportarmela for other jobs that are not able to complete,it remains only to see if you were to try to regenerate at a distance of a few km, but I don't think.Thanks cawadany! I am indebted to you! Ps the amount of ash in the filter is unchanged but not to 0 if it can be useful for like info
Very good! At the next Joseph!
Guys I update. In a few days I return to the bmw above-mentioned complained of the same problem,I have not yet had the opportunity to see the car,can someone verificre the file to take away any doubt?
Quote
