Using the special map, also called an overboost..Originally Written by aleg
Using the special map, also called an overboost..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Depends on the type of ecu,hw 392 and 600 there is the call an overboost and checking even outside the map, or at least I do not find it.the only thing is hw 961.
After various tests I was able to adjust the pressure to 1.6, the peak e1.4 constant I put a spring in the wastgate making it harder and then adjusted through the screw. I've had to remap, but having the maps turbo that are not active in its limiters are also inactive? Now, the machine in 4th gear at 1.4 bar off .
That gives you the error?!? If off is the rail if it gets into recovery and does not accelerate over the 3200 is the block to the turbo then if the file is safe a hand you give!
you should be in recovery anyway, as soon as I read the file the place . the machine and mapped so I don't have the file ori
If peel-and-why "touches" the limiter turbo set at 1.5 bar..
Check out that fifth load to full load, the pressure continues to climb...
I can not load the file .anyway, I found the original file to compare, I placed the limitatoriturbo now it seems that will not fall off .a question of the exchange of jtd fiat as the reports are all the same ? I put one of the tide 115hp because its was faulty and I thought it was more along instead nothing has changed
Quote
