guide to disabling the butterflies SWIRL engines Alfa MJT

[max40]

sorry but the guide is to disable the ecm titanum?

ecm titanioum I do not think that reports on the standard driver the address of the swirl and by them you can just quit but if you have the starter motor failure, you have to remove the dtc with the plug disconnected otherwise not solve anything even if you close from the map...

[faberecu]

you can do It with ecm in 2d , if you know the area , and the dtc layer zero to remove , or only do dtc Off as you think , the correct change is full remove swirl or flap off with the engine off and the manifold with the plugs and without the butterflies , then a compensation map for optimizing the operation at low rpm

[Steeve83]

Hello I am I also with the problem of swirl someone of you knows how do you disconnect the rod of the actuator as there arrival!I have to remove the battery?I have a alfa 159 2.4 200 cv

[max40]

Hello I am I also with the problem of swirl someone of you knows how do you disconnect the rod of the actuator as there arrival!I have to remove the battery?I have a alfa 159 2.4 200 cv

to disable you have to disconnect the plug to the motor .. do a diagnosis and joining the dtc that you have to delete from the file ... that's all .. then you can also quit from the map if you want but it is unnecessary .. in any case, the only physical work that remains is to make sure that the blades are open, or the unmount and delete .. hello

[CLAUDIO.]

hello alpha, I've never tried it, but mercedes just put a resistor on the plug of the scooter and do not need to delete no dtc and no recovery tested and it works, especially when the starter motor is faulty

[Errecinque]

to disable you have to disconnect the plug to the motor .. do a diagnosis and joining the dtc that you have to delete from the file ... that's all .. then you can also quit from the map if you want but it is unnecessary .. in any case, the only physical work that remains is to make sure that the blades are open, or the unmount and delete .. hello

If you can read and write the map post your reading gold you you the escudo I the swirl. So you don't have to unplug anything

[carloalain]

Hi I have a Gt euro 4 with intake manifold in plastic... Looking on do not see the
The rod that controls the swirl someone can give me explanation about it ? I would like to know how to delete these damn swirl if only electronically, and if there is the same risk that might come off ... Or even physically, and how ... Thanks

[Errecinque]

If your ecu is edc16c8 you don't have the swirl, if edc16c39 yes

[ugoboss]

if it has the manifold with the plastic you don't see because they are under, if we look at it from the battery side under the manifold you'll see the group scooter, but to take it apart you need to remove the intake manifold, which is not easy.

[tranky]

The 90% that the range of cars is edc16c39 and disable it from the ecu you can make it safely, the physical removal involves the removal of the dtc, I assume..
Since you are a newbie it is useless to attach images, but you'll find them quietly looking for "alpha gt swirl" under images and see how it is done from the outside so that you recognize to view.
For the disassembly agrees that you sail on ******** or similar to see step by step the steps.