In fact, the documentation does not ? updated to version why? I put a list of means in Excel that refers to Ver. 4.82, however, to understand if a means you can do it over OBD without relying on the list of the documentation I think that it is enough to start the Digiprog, without being on the middle, selezionaare the means and he will tell you what type of adapter is used, if you ask the ST16 means that it works on OBD otherwise you have to go directly on the Eprom or tab
Now I hope that at least the Usb Driever on the CD are correct and are not the ones for the DiagPro, so I can see what you can? do with the Digiprog connected to the Pc.
I guess you could read the Eprom and then make a duplicate on a Virgin, this might be useful to me when ( if it ever will be?) sar? pi? savvy or to do experiments in writing on a blank.
I have to find a way to recover the specific programmes for the Digiprog on the internet ( I accept suggestions and aid) in the event that the seller "kung fu Panda" are not able to retain them from me.
The next machine on which to try the Digiprog sar? the Panda Sister and a multiple of a colleague who has the problem in the light of the AirBag is turned on.
Today I tried to connect it to the USB port of the PC but has not shown signs of life ... the Pc does not ? noticed nothing, tried changing the cable and change the PC, but always with the same result, so I guess the connection port of my Digiprog is not working or is disabled
Last edited by msport (exil77grande); 27-04-2014 to 15:11
I thought that the problem of the blue screen was only in the case of an update on Digiprog not updatable, not if you were trying to connect it to the Pc.
Hi all, I have tried i tried again and connect the Digiprov to the Pc, not to update it, but to copy the files saved on the inside, there was the way, the pc will not feel anything when I attach the usb cable, I turned on the PC TERM from inside the digirpog, then I begin to suspect that the Digiprog that I have sold is free of USB.
I tried to ask at the supplier "Kungu Fu Panda" info on the problem you are experiencing, we see that he says to me, meanwhile I read in previous post that someone of you had the same problem, saying that it lacks the Ftdi, a user of the forum posted the image, but not being able to see ... I can't tell if I'm in the same condition.
Looking here and on the internet I found the owner of the Digiprog that has the same problem, saying that it lacked that is missing from the FT232BL chip USB-to-TTL in the Digiprog, which I think is responsible to operate the Usb port, he also had posted the picture ..... but I could not open it ....
Any of you had the same problem and ? managed to solve it ?
Do you think putting this in FT232BL USB-TTL , and on the internet-what a ten Euro, you could find the "care" ...
Last edited by msport (exil77grande); to 03-05-2014 14:05
I have it connected to the pc, he asked the driver, them direct on the CD-rom, and loaded the drivers. Open the software I try to connect the Digiprog, I head to the software and I try to read the content on the Digiprog. The software gives me an error and says: Digiprog not open.
Quote
