The map informed delta 1.6 mjt

[tranky]

Of course, I'm talking about the map ori without changes

Joseph, you are at a point that YOU have to load the map and do a log.. you're perdendoti in too much chatter and you have to show results.. the rail will be a limiter, check it out well in 2d ... now I don't have the map in hand, but if all the maps the ports to target, you can not get to the prx request, if we do not arrive missing some limiter off.
Now comes to iq determined, and we see the results.. dajeeee

[giuseppe89]

I forgot the files here they are!!

[giuseppe89]

Hello tranky I don't want to get lost in too much chit-chat,I had to wait until Sunday afternoon to do a log because too much work and I have to say that the car has finally injected 86 mm3, therefore, the limitation to 70 mm3 has been exceeded in the first log but the car went into recovery with malfunction indicator light engine turned on, and the resulting loss of performance,I carried out the read errors, and it gave me an error "position, a variable geometry turbo," or something like that...my troubles by having the position sensor I believe it has svilupatto too much pressure for that opening of the VGT and then giving me quest error...so I reset and did a second log, and the problem has not reappeared this time. I then ask you a question, but the log is not part instantly?both logs are parties with some of the world delay, and then after the 1000 rpm...I will arrange a little map (I forgot to create the bp from 85 mm3 in map rail objective) and do the log. I attach now the file is tested and the 2 log.

[tranky]

Great job.
Check out the geometry that does not hang from the log.
If error not fixed, you'll have zozzeria in the auction.
For the rest, I'm glad to arrive at the IQ.
See if cala too much at high rpm and stabilizes the lambda

[giuseppe89]

Thanks for the collaboration tranky alone there would have never succeeded!!birrozza paid! for the rod I think he has problems with other maps and pressures similar never had failures,but controllero...with regard to the lambda from a log just cala the intake air much lower, the iq although I don't seem to smoke at the exhaust,I'll try to lower a bit the lambda and see how it behaves in the iq

[tranky]

Thanks for the collaboration tranky alone there would have never succeeded!!birrozza paid! for the rod I think he has problems with other maps and pressures similar never had failures,but controllero...with regard to the lambda from a log just cala the intake air much lower, the iq although I don't seem to smoke at the exhaust,I'll try to lower a bit the lambda and see how it behaves in the iq

Lowers some point in the vgt over the lambda and you'll see that salt's IQ and prx

[giuseppe89]

Lowers some point in the vgt over the lambda and you'll see that salt's IQ and prx

tranky for abbare the vgt you mean to lower the value in the map so as to keep the rod more open?I thought I would do this change from 1500 rpm onwards and from 50mm3 up to maximum iq... is correct in this way? another doubt: in this way, the turbo pressure would rise further, or would then be "controlled" according to the value set in the map? I also fixed the second map rail objective that had escaped me.The lambda've set it to 0.9 so as to see if injected and not sfumacchia too. In the end of the week loggo and see how it behaves

[switing63]

Now we know that the map 1D5784 is actually a map that restricts the injection of diesel fuel.

[tranky]

For the VGT controls the axes of the bp if they do the IQ correct, in the case of airports ALL over the map, with precise values and to calculate any increase/decrease!
this change does not change anything, beyond piccate turbine that you can have between the objective and the real.
For the lambda, you should always climb it and not leave it static.. at least I'm doing so, and I get the best results.
anyway you do and see with the log as it progresses..

[giuseppe89]

Hello guys finally I managed to make the log and the car manages to inject all of the 90 mm3 required...the map is obviously to fix it, it pushes quite well even if compared to a map deceives is less gritty but more "soft" in the press...apart from this, the car smokes a lot when it is a tablet then I think you need to check a little bit the duration, given that the advances are calculated up to 70 mm3, how it behaves after that iq?uses the same advances? alleg now the file and the log made