KESS V2 MY works 100%

[rodcraft86]

guys you can put a sharp photo diode soldered? I would not like to lose the sense

[gianni1001]

What kind of key do you have? The ignition key or classic card?
If the card you put in before, do not touch any pedal insert the card, then press 8 to 10 seconds, the start button without touching any pedal, and the framework does not switch off during the reading.
If it asks you to turn the ignition off, remove the card, and when you turn do the same procedure
Ok?
=ugoboss;100649]yesterday I had a problem, I tried to read a renault scenicII 1500 siemens sid , and after-the-fact data, and have begun to read when ? arrived at the 50% and gave me error in the data transfer, I tried 2 times but always the same, always ? never happened to someone and you know the cause, thanks.[/QUOTE]

[rodcraft86]

the kess, however, tells you the procedure when you select the ecu and also by clicking on the help button, and explains everything in detail

[ugoboss]

What kind of key do you have? The ignition key or classic card?
If the card you put in before, do not touch any pedal insert the card, then press 8 to 10 seconds, the start button without touching any pedal, and the framework does not switch off during the reading.
If it asks you to turn the ignition off, remove the card, and when you turn do the same procedure
Ok?
=ugoboss;100649]yesterday I had a problem, I tried to read a renault scenicII 1500 siemens sid , and after-the-fact data, and have begun to read when ? arrived at the 50% and gave me error in the data transfer, I tried 2 times but always the same, always ? never happened to someone and you know the cause, thanks.

[/QUOTE]

the fact ? that is not me ? switched off the ignition, everything ? been turned on.

[gianni1001]

But you have the key to the traditional fly card?

[gianni1001]

the kess, however, tells you the procedure when you select the ecu and also by clicking on the help button, and explains everything in detail

You ? happened to me
And I followed the directions of the help.
in the help c'? written press and hold the start button until a click is heard as the rel?
The fact ? that does not feel....
If you press and hold the button at least 10 seconds, but you are sure that it will works

For? if not, do the procedure

[gianni1001]

But you have the key to the traditional fly card?

I wanted to say " ... or the card"
It does not fly...

[ugoboss]

I have the card.

[gianni1001]

the fact ? that is not me ? switched off the ignition, everything ? been turned on.[/QUOTE]

To me it seemed switched on, there was also the engine light yellow
But really? while the law off...
To me came down to 30% after missing 5 minutes and 15 seconds after which?
Stopped reading and asked you to turn off the picture
? you d? error data transfer...

[ugoboss]

the fact ? that is not me ? switched off the ignition, everything ? been turned on.

To me it seemed switched on, there was also the engine light yellow
But really? while the law off...
To me came down to 30% after missing 5 minutes and 15 seconds after which?
Stopped reading and asked you to turn off the picture
? you d? error data transfer...[/QUOTE]

then you very likely that it is as you say, the next time I hold it more, thanks.