Opinion the map 159 - 1.9 Mjet 150 hp

[tidus1985]

*tidus...you know that what you say is not ? can?also by not updating the bp of the rail, the ecu could not? go beyond the prex set in the map...
example, if the bp of the map rail original stop 70mm3, for the values of IQ in excess of 70mm3 the ecu will use? always the values for IQ equal to 70mm3...

in fact, strange mario, but to me he has done this work, you remember I was talking on the other thread, when I climbed the map rail, sara was maybe a peak or an error of fes, but so was riposrtato on the log

[tidus1985]

is the limiter of diesel fuel based on temp, modda limiter to 11000 up to 1CC0B2 including, 1CF404 c'? an error MUST be ori, system these two things, you see that the error will go away

[mariodarkblue]

...surely an error, fes...? impossible to happen what you say The ecu can't? give you pressure to not set...why? do not know where to go to look for!

[paolo159]

ok Tidus, correct 1cf404 and 1cc0b2.
How ? that limiter genres that error? even after I have written around 2700 rpm has had a failure, as if cut cleanly the fuel...
pi? later, I try again to upload it with the fixes, in the meantime, if I can apply the other tips you gave me :-)

[tidus1985]

...surely an error, fes...? impossible to happen what you say The ecu can't? give you pressure to not set...why? do not know where to go to look for!

be in effect for 100mm3 of diesel fuel, he interpolates, has no value, then there could be arrived for interpolation

ok Tidus, correct 1cf404 and 1cc0b2.
How ? that limiter genres that error? even after I have written around 2700 rpm has had a failure, as if cut cleanly the fuel...
pi? later, I try again to upload it with the fixes, in the meantime, if I can apply the other tips you gave me :-)

because those maps are for the wing temperature, and then ? normal, the test with the correct maps

[mariodarkblue]

*tidus...but what to interpolate?that she knows that the max pressure that can? give ? 1600...

[paolo159]

and now I pass to the other 3d! let's see if I can give my own contribution to discover more maps on the edc16 :-)

[paolo159]

Tidus map tested, and the error disappeared...now not from pi? no problem!
the disbursement ? very clearly, keeping in mind that this is a map and soft, the ear? cos? at least finch? I do not remove the dpf then we can optimize it even more :-)

[SandroMarciano]

I I were you I would make an eye at the average distance each regeneration, cos? you dimezzer? in a short time, then I sincerely straight lines above the limiters don't like it, if the engine is to be outside the optimal temperature range, there must be a limiter in a diesel, otherwise you risk to break everything...

[paolo159]

Sandro even I like very much...even though the car is going good I do not good night's sleep, not have those limiters...I generally am opposed also to pull the line straight on the lim couple figured those of diesel fuel.
Increments I advice to give on those limiters? a 15/16% do you think that will be a good increase?