info galletto v54

[Errecinque]

Usually when the driver ? wrong should not crash the pc, a headache that goes needs to give you the communication error.

Try to throw as soft as the administrator, and mode? XP sp3 (right button on the link) and see what happens. Anyway if a C9 the cock of the law in the virtual one, while if a 16c39 should read it without problems. Anyway, test it on another car before you condemn it.

Thanks....I'm the only admin of the PC,I assume that you start already? in mode? the administrator and I have xp sp3 as s.or.....I don't understand your advice can you tell me more x please to implement it correctly? And then what the law is in a virtual machine? Sorry eh but I have to learn still a lot. Thanks

[marco_evolution]

I confirm that by those numbers you posted ? edc16c39 read file 2 mega..Try a protocol edc16c39 also another brand/car type fiat-alfa..read time about 50 min

[Errecinque]

Thanks....I'm the only admin of the PC,I assume that you start already? in mode? the administrator and I have xp sp3 as s.or.....I don't understand your advice can you tell me more x please to implement it correctly? And then what the law is in a virtual machine? Sorry eh but I have to learn still a lot. Thanks

I confirm that by those numbers you posted ? edc16c39 read file 2 mega..Try a protocol edc16c39 also another brand/car type fiat-alfa..read time about 50 min

S? in fact, if you select the C9 tells you that a bit? a file from 1mega and c39 2 mega But the fact that the sw warns you for this last option a bit? only one of the two maps, which means....???? And you recommend for a complete schedule of do reading in the bdm

[ugoboss]

S? in fact, if you select the C9 tells you that a bit? a file from 1mega and c39 2 mega But the fact that the sw warns you for this last option a bit? only one of the two maps, which means....???? And you recommend for a complete schedule of do reading in the bdm

because this machine has all the maps repeated two times, and interpreting it in a serial it read only a part, to make a complete reading you have to read it in the bdm as it tells you the sw

[blackwolf76]

There enters nothing that you are the only admin of the pc. ? the mode? run with advanced permissions that you need, and you launch it with the button on the right side.

[marco_evolution]

if the sw part there is nothing to make system admin.

[marco_evolution]

uses a protocol type alfa fiat edc16c39 any car and let me know.

[ducati83]

I ugoboss, this you should do it in the bdm, to me some of the time ? happened and call it a day perhaps for this reason, so to avoid problems I'd recommend you to open and do a full read, then you can also use the file read in bdm of the flash to write to a serial port and you're quiet in the case of blocks.....I know that the ecu is located in a very inconvenient but I would lose that half hour to do everything....

[Errecinque]

Ok the ecu in question ? removed and opened, and before connecting the all seen that ? my first time in the bdm does not want to risk the ecu. Therefore, first of all I ask you why? the manual files are installed in the equipment you speak of use the 12 pitches of the port bdm, while I have seen other instructions for edc16c8 only use 10 and in fact the flat cable supplied it seems to me (now I don't have one on hand )have 10 and not 12. Then? Childbirth, however, from the first to the left looking at the ecu from the opposite side to the comb.

[ugoboss]

Ok the ecu in question ? removed and opened, and before connecting the all seen that ? my first time in the bdm does not want to risk the ecu. Therefore, first of all I ask you why? the manual files are installed in the equipment you speak of use the 12 pitches of the port bdm, while I have seen other instructions for edc16c8 only use 10 and in fact the flat cable supplied it seems to me (now I don't have one on hand )have 10 and not 12. Then? Childbirth, however, from the first to the left looking at the ecu from the opposite side to the comb.

parts from that side to them, but it balances, or you have the e xxx.