views of the mirror ...
views of the mirror ...
ok correct the name.. it was what I meant anyway
but the rai and the limiters match ??
Map Rail Pressure that Ecm calls injection choked map1 16x16 and is located at the address 0675BEOriginally Written by faberecu
While the "limiter rail and immediately after" is located at the address 067946 as in the photos, a map 8x8
limiter Rail.jpg
The patience and virtue of the strong..
pity we can't see the attachments would also be useful to me to study this type of ecu....
Ok for the limiter rail, but there must be some other thing. While raising the "ladder", not salt the maximum pressure, in addition to the 1480 bar, it's enough if you stay with the pmpa rail ori, but they are not enough if you want to go further with the processing. If you took the pump 90, turn 1600bar quietly of the series, but I couldn't get there.
I browsed through both files to compare, 75, and 90, and c'? a bit different, that in the 75 ? set to 775, and in the 90 to 900, it seems to me...Tried to edit, you can climb for a moment the pressure, and then turn off the machine for damage....
Ah, the bit ? the first map rail...
the pressure limiter rail max and giusto.alzando that bit you move the limitation
to which are you referring to?the pressure limiter rail max and giusto.alzando that bit you move the limitation
Guys someone to do a test c'??? serves a point, lancia y, or idea 70cv to test the map in question
The patience and virtue of the strong..
I have a lancia ypsilon 70cv and I can do all the experiments that I want to, but I don't understand how I have to change the bits mentioned above.
The file ori ? this:
Last edited by msport (exil77grande); 07-11-2013 at 23:51
I don't yet, but you...
you tell me how should I do, and I do
Write permission
Quote