faber..I saw the screen, but this pc I don't have the programs to open the map...but what do you mean by "mirror"??do you mean that they are maps with reverse dilettura?
faber..I saw the screen, but this pc I don't have the programs to open the map...but what do you mean by "mirror"??do you mean that they are maps with reverse dilettura?
views of the mirror ...
This one from you ? the injection split Map1 as it is called in the ecm already? spoken in the previous post is located at the address 0675beOriginally Written by faberecu
The address 64a02 ? a torque limiter as a function of temperature is not the center with the foot pedal in the screen earlier made by me with winols c'? the description and conversion
Last edited by leandro89; 07-11-2013 at 17:16
The patience and virtue of the strong..
ok correct the name.. it was what I meant anyway
but the rai and the limiters match ??
Map Rail Pressure that Ecm calls injection choked map1 16x16 and is located at the address 0675BE
While the "limiter rail and immediately after" is located at the address 067946 as in the photos, a map 8x8
limiter Rail.jpg
The patience and virtue of the strong..
pity we can't see the attachments would also be useful to me to study this type of ecu....
Ok for the limiter rail, but there must be some other thing. While raising the "ladder", not salt the maximum pressure, in addition to the 1480 bar, it's enough if you stay with the pmpa rail ori, but they are not enough if you want to go further with the processing. If you took the pump 90, turn 1600bar quietly of the series, but I couldn't get there.
I browsed through both files to compare, 75, and 90, and c'? a bit different, that in the 75 ? set to 775, and in the 90 to 900, it seems to me...Tried to edit, you can climb for a moment the pressure, and then turn off the machine for damage....
Ah, the bit ? the first map rail...
but if you look at annex l of the schemata map 3d, I found two possible limiter
also a rail pressure in the clear 1460 bar ... maybe there are addresses
Last edited by msport (exil77grande); 07-11-2013 at 23:46
the first map I also think I rail...the other I do not know
the pressure limiter rail max and giusto.alzando that bit you move the limitation
Write permission
Quote