Opinion the map 159 - 1.9 Mjet 150 hp

[paolo159]

guys a few posts ago I asked for a hand to find the 2 lim iq of which I had spoken, but surely my question ? lost :-)
who can help me?
purchase

[tidus1985]

Looking good, sonon3 in all , the first one that you find has the shape of a knife with so many teeth, all of after the lim torque, the second ? similar to the torque limiter and the third ? similar to the prjmo, the second and the third are side-by-side

[paolo159]

Final fantasy x, the first there are several maps that are similar but none seems to me to be a lim iq unless the conversion factor is different from 1...
for the second and third I don't see maps that are similar to the lim of a couple.

which one ? the conversion factor?

[mariodarkblue]

Not c and factor conv...are directly mm3 enters in the topicke I opened...so nn disperse information...

[paolo159]

ok mario..what topic? the one on edc16?

[SandroMarciano]

now I don't have time to look at the map, but the timing ori will not use them all, and if you just need a map stock you can safely leave them gold, you need to? find the surge flow rate, is found right after the torque limiter, there are 2, one is a function of a factor, consider that an axis is presented as the pedal. the other ? in function of the water temperature.

guys a few posts ago I asked for a hand to find the 2 lim iq of which I had spoken, but surely my question ? lost :-)
who can help me?
purchase

I few posts ago I said...

[paolo159]

following your suggestions, unfortunately, are not able to find anything expressed in values that may reflect the mm3...
in the meantime, by analyzing the map I found these two maps, at first sight, seem familiar:

the first one starts from 1c1f86
the second starts from 1c30e8

would you know what they stand for?

[tidus1985]

no need to do it, you are committing then I'll give you a clue, the first one ? 1cc014, then the other 2 you can find more forward after the torque limiters of the various gears, one ? 1x12 the other ? similar to what I have posted to the address, the help you have given, now you have to find them alone, well I have a floor plan so, if you look at my topic of 147 sandro had given me many useful info, give us a eye, maybe the addresses will be some access on split-level, but if you look at the 2d limiters are really identical

[SandroMarciano]

no need to do it, you are committing then I'll give you a clue, the first one ? 1cc014, then the other 2 you can find more forward after the torque limiters of the various gears, one ? 1x12 the other ? similar to what I have posted to the address, the help you have given, now you have to find them alone, well I have a floor plan so, if you look at my topic of 147 sandro had given me many useful info, give us a eye, maybe the addresses will be some access on split-level, but if you look at the 2d limiters are really identical

in fact, then you just need a little bit of elasticity?, if you know what to expect, the geometry of curves and roughly where they can be...

[paolo159]

thanks Tudis! tonight seemed a bit absent from the forum, but I assure you that I'm working on the map :-P