Information for all to read and write IAW4MV the VAG group, you have to unsolder the eeprom 95060.
It can? be done with or Galletto Kess V54
Information for all to read and write IAW4MV the VAG group, you have to unsolder the eeprom 95060.
It can? be done with or Galletto Kess V54
Information for all to read and write EDC15C7 FIAT group, you have to unsolder the eeprom.
It can? be done with or Galletto Kess V54
but it is small change in the hardware, you may know or not?Originally Written by ecuprom
You can? say, the problem of KESS v2 with the K-line ? the voltage.
If you select the line voltage source k ? approximately 4.5 v should be the voltage of the battery.
Will try? to make a description of how it works perfectly for us $ 0.30. I upload photos with the change. It's very simple.
ok are waiting for the photos then.
ugo ---- president A.E.P.
Here, the editing, the photos ? the original, but ? equal to kess clone.
Above all, don't try to put another diode 1N4148, place in a certain sense as the photo.
ugoboss expect
The v2 24v kess pu? work without any problem. With this change you will see? that the K-line diagnosis works perfectly.
I only hope that I thank you.
Tested with MED17 TRICORE with adapter Tricore.
Quote
