c'? way to understand when the tprot (antituning) ? this?
c'? way to understand when the tprot (antituning) ? this?
Do them all a tour that will not be exposed to risk for reading serial aliantech ? nearby have already entered some of the ecu in the last aggiornamento............
P.S.
What's the most beautiful that even their tools ori plant ecu and once planted will not make it more even on the bench you are a shooter, I'm antitunig but it is giving trouble to them................
They are not totally agree with the reading in the boot we are in an iron barrel.. No reading in itself... But because of the resistance that we are to be welded in the c46... Can happen of thermal shock which can start the micro...Originally Written by sno74
I read on a forum foreign avdi official immo off on edc17c46 without problems
avdi is not the BMW diagnosis?
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
No, abrites avdi ? a attrezzino very advanced and very expensive that is. Little bit of everything.
in the meantime, to clone it you need an ecu with the same sw and hw,what they already know well, then try with another tool in addition to the rooster , chinese??? then you have to find someone who makes you to immo off or to take away the l-antituning , once removed you can clone.
if 3 times and went to the writing and strange that nn communicates , at least you have the wrong boot and put it to ground somewhere else.mail the beckup, see if you can make or immo off or sblcco ecu.
Be controls the plant of the Rooster, above all, the on-off switch..
m? once the evening is broken with a EDC17 and well I or seen bad times..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Aurelio You have solved with the ecu??
The patience and virtue of the strong..
Guys excuse me if I do not have more? up to date, but unfortunately I am at sea in the operation mare nostrum, then virtually ? success this the unit I have blocked but the big problem is not ? was this but bens? in the desolder not I have realized that I have fattoun short between pin 3 of the micro-ergo and jumped then I took an identical unit on which they cloned my and removed the tprot,currently I've mounted as they are in the sea, but as soon as I horsemanship
Quote
