Reset the ecu IAW59FHW303 with "flash partial cancelled"

[maurof650]

.....also thanks to the boot file that you postat.

[fire]

there ? never happened with the mpps (I do not know if ? his fault or not) encounter an error indelible "eeprom defective" ?
not ? nothing ever happened in my 1.2 8v, but after the umpteenth time you write me this error that it can't be? delete...because

[marco_evolution]

I believe that you need to fix the checksum the clone ? evident that the patch

[fire]

then today, for a test I put the file ORI and see if you still have the error

[marco_evolution]

ok but I just believe that you ripresenter?

[nox]

Good evening guys, sorry if I open a post, but I appended to this I should scodificare a 59 f still I nn for the hands, I have to say that on these ecu nn I've never worked at my disposal I cock 1260 mppsv12. Gallo 2 v53 and v 48. I saw in the folder of the cock that you have to make a hole on the ecu to get it to boot with a needle that I didn't understand that by using the tool decode iaw I do the reading, but the file that I read I scodifica at the time of reading???? Thanks in advance for the answers

[giary74]

with the decode function of the rooster, read the ecu in the boot and save the file that will be? automatically scodificato (partial) when the re-enter

[nox]

Many thanks

[giary74]

Many thanks

nothing...
the only difficulty?, if it's so? we want to define it, is to boot the ecu. We recommend you to make the original harness and connect in advance the threads that interest you. Then make the hole, a little bit of coordination in the performance and you'll see that everything will go? for the better. Make sure that the power supply is adequate and that fixed the wires during the procedure, otherwise you risk throwing everything!!!!

[nox]

Ok, thanks again!