I hope that I have explained evil; to write no. of the series in the VCI c'? need a program, not just do the reinstallation of the software and do the firmware update !!Originally Written by rts
I hope that I have explained evil; to write no. of the series in the VCI c'? need a program, not just do the reinstallation of the software and do the firmware update !!
Thank you tech, you explained very well c'? I have the program, let's see if before night I ****** to try like you said... there st? suffering from the lack, I've got another new cdp+ 100250 but it has some things that the old one did.
You managed to fix it ?
No caspiterina I tried to brush the welds but nothing the dear relays taking as much as you collegavi not take more? I tried to write again to the n?serial but I get and error with the tool, not the law, not even....but the three led illuminano....orcaloca!!!!!
The tool does not the law, but he can't even write ?
If you do not even able to write can? be that the memory in which are located the serial ? dannegiata;
I know that I must keep it as an ornament !!
you have the tracks from the usb connector broken on the pcb
don't see but if you measure are open , do the four bridges with copper ... and finish , made a number of 100% or mandamelo if you're not familiar with the microscope, and the station, sometimes the components with + mass tear the slopes , or you dissaldano
? good idea to resolder all the pcb when it arrives , many are not the best
Hi thanks for the suggestion I st? by controlling what I say, but I can't find anything broken...what could break with a vibration in the meta box pcb?
I don't feel like starting the rel?, if I connect the usb-to him, the red led lights up and also if I connect to the eobd socket.
Write permission
Quote