Page 2 of 3 PrimaBefore 123 LastUltima
Results 11 to 20 of 21

Discussion: BMW 1 eoc 17 c06

  1. #11
    THE AVERAGE USER
    Date Of Registration
    Nov 2013
    The resort
    Mannheim , Germany
    Messages
    256
    Yesterday at the BMW I put the file ori. The customer says that the engine sobbed. ? understand, also, to you this problem .

  2. #12
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    Citazione Originally Written by 159sportwagon Visualizza Messaggio
    Yesterday at the BMW I put the file ori. The customer says that the engine sobbed. ? understand, also, to you this problem .
    if the file ori does not' surely there is something in your edit that is not to be', but without seeing the file, not even the wizard of tobruk we can tell you the reason.
    ugo ---- president A.E.P.

  3. #13
    THE AVERAGE USER
    Date Of Registration
    Nov 2013
    The resort
    Mannheim , Germany
    Messages
    256
    For now, don't I have is with the file ori. The client will feel in a couple of days.

  4. #14
    THE AVERAGE USER
    Date Of Registration
    Nov 2013
    The resort
    Mannheim , Germany
    Messages
    256
    Tonight, I see you post the file ori and mod

  5. #15
    THE AVERAGE USER
    Date Of Registration
    Nov 2013
    The resort
    Mannheim , Germany
    Messages
    256

  6. #16
    THE AVERAGE USER (OF)
    Date Of Registration
    Jul 2012
    Messages
    935
    in my humble opinion you have made some mistake...

    You have increased too much the time of injection, even at high rpm, and the turbo pressure ? date evil. You must not boost at low rpm and keep about 6 to 8 %. Also, you have no increased torque limiters, then the gains may be limited just by it and q

  7. #17
    THE AVERAGE USER (OF)
    Date Of Registration
    Jul 2012
    Messages
    935
    then they may be to create the hiccups that you speak of.

  8. #18
    THE AVERAGE USER
    Date Of Registration
    Nov 2013
    The resort
    Mannheim , Germany
    Messages
    256
    and how do I change the turbo pressure and the injection timing

  9. #19
    THE AVERAGE USER L'avatar di V.V.
    Date Of Registration
    Nov 2012
    The resort
    Tuscany
    Messages
    182
    To my way of seeing things is missing pretty much everything, so many maps out of the driver you let the ori, which increased too much, the injection time (I was on my 118D I left them virtually ori with excellent results), the map Nm > iQ increased bad (you have changed only the one identified by the driver of the ECM), the later you leave the golds, you have changed a limiter rail pressure that you may also leave the original (the last by scrolling the map in 2D), torque limiters for the gear you left them gold, there is a lack the mod on the svtql (you can also do without it if it does not exceed the 420Nm), turbo pressure is made evil, and much more.

    For the rest, if you make a Backup in boot mode tricore, you can also do it in serial, tested with FGTech v53 pi? times! If you were to block, you can always ripristinalra in boot mode tricore; however, it should be necessary, then, to do alignment DDE-CAS-(EWS this ? the nomenclature that shows my diagnosis).

  10. #20
    THE AVERAGE USER L'avatar di V.V.
    Date Of Registration
    Nov 2012
    The resort
    Tuscany
    Messages
    182
    I forgot, you did not close the EGR!

Page 2 of 3 PrimaBefore 123 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •