cut file

[andrew64]

obvious mpps does not write the file to 2 mb, and you have to reduce it to 1 mb with the procedure indicated by giarras

[ecuboost]

but really I write quietly file 2 mb with mpps, I believe that mpps do not write the backup made with the bdm that reads the entire contents of the control unit, for qst you have to cut them.

[giarras]

but really I write quietly file 2 mb with mpps, I believe that mpps do not write the backup made with the bdm that reads the entire contents of the control unit, for qst you have to cut them.

you write, " quietly the file is 2 mb, but the marelli 1.3 mjtd from 75hp and 90 hp that are 2 mb with mpps, you can't write them down you have to cut them as per procedure.

[ecuboost]

sorry I have written safely to a edc16c39 2 mb, and an apple I have to write again,qst point I wonder why?

[giarras]

sorry I have written safely to a edc16c39 2 mb, and an apple I have to write again,qst point I wonder why?

read!!!! above, edc16c39 no problem read 2mb and re-enter, marelli 75hp and 90 hp you have the file 2mb cuts from 1mb only with mpps
I hope now it is clear to you.

[ecuboost]

in fact, since before you spoke in general terms of the 2 mb

[msport (exil77grande)]

in fact, since before you spoke in general terms of the 2 mb

yes, but the 1.3 mjet is not edc16c39 but marelli then I do not think the same thing even if both files are originally from 2m.

[g14nluc4]

You can use winhex

[mecdoc]

???????????????????????

I cut them I often used winhex or HxD are more practical

[giarras]

???????????????????????

? a hex editor.