Page 6 of 9 PrimaBefore ... 45678 ... LastUltima
Results 51 to 60 of 83
  1. #51
    BEGINNER
    Date Of Registration
    Jul 2013
    The resort
    naples
    Messages
    32
    Look at my problem ? the machine part with difficulty? and spy code on...Sporadically turns off the indicator code and the car starts right away...others acccende spy code and engine light and the machine will not...
    I believe it is a problem of the bodycomputer that I wanted to resolve with scodifica total..The problem is ? presented, however, after replacing the Engine-the gearbox and the cable loom engine taken from another point jtd and the same before it started very well!!! the only doubt ? that is the point where I took all of it was a 2001 and mine ? a 99!!!

  2. #52
    THE AVERAGE USER L'avatar di giuseppe1374
    Date Of Registration
    Feb 2013
    The resort
    Sicily Catania
    Messages
    408
    before doing these experiments, the empirical bob for a good diagnosis, the motor 99 to 02 are the same

  3. #53
    BEGINNER
    Date Of Registration
    Jul 2013
    The resort
    naples
    Messages
    32
    Diagnosis with examiner
    in the Ecm
    Electronic key no code received
    Transmission of can messages. Absence message from the electric driving.
    In the body
    Error line can-bus off intermittent.
    I have checked the connections can, and even I tried connecting via the can body-ecu in parallel with the plant outside

  4. #54
    THE AVERAGE USER L'avatar di giuseppe1374
    Date Of Registration
    Feb 2013
    The resort
    Sicily Catania
    Messages
    408
    all you need to do ? take another body pass the e2p from one body to the other, and you are affixed.

  5. #55
    BEGINNER
    Date Of Registration
    Jul 2013
    The resort
    naples
    Messages
    32
    ok, there prover?...even if I don't understand?, if I scodificato, which there enters the body????

    If scodifico total, in theory, the ecu should not ask for the consent of the body to leave no????

    Problem solved by writing the file scodificato that has given me a friend....
    Last edited by msport (exil77grande); 06-09-2013 at 17:40

  6. #56
    THE AVERAGE USER (FO)
    Date Of Registration
    Mar 2013
    Messages
    133
    the important ? you have managed

  7. #57
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    Citazione Originally Written by klark82 Visualizza Messaggio
    ok, there prover?...even if I don't understand?, if I scodificato, which there enters the body????

    If scodifico total, in theory, the ecu should not ask for the consent of the body to leave no????

    Problem solved by writing the file scodificato that has given me a friend....
    well then I attach the file that is used so the next time if someone has your lying problem has a tested file.
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

  8. #58
    THE AVERAGE USER
    Date Of Registration
    Jul 2012
    Messages
    127
    Citazione Originally Written by klark82 Visualizza Messaggio
    ok, there prover?...even if I don't understand?, if I scodificato, which there enters the body????

    If scodifico total, in theory, the ecu should not ask for the consent of the body to leave no????

    Problem solved by writing the file scodificato that has given me a friend....
    hi I have a 147 jtd edc15c7 every now and then I by problems in the code, do not leave me to walk I wanted to do the scodifica total
    but after that, I quit the written code, but does not set into motion will place the file
    the original 0281010332 103366536il file scodificato (meucci or carsoftware)
    File Allegati File Attachments
    Last edited by msport (exil77grande); 14-06-2014 to 16:51

  9. #59
    THE AVERAGE USER
    Date Of Registration
    Jul 2012
    Messages
    127
    Citazione Originally Written by isfedale82 Visualizza Messaggio
    hi I have a 147 jtd edc15c7 every now and then I by problems in the code, do not leave me to walk I wanted to do the scodifica total
    but after that, I quit the written code, but does not set into motion will place the file
    the original 0281010332 103366536giugnocristianl.rar
    the file scodificato (meucci or carsoftware) GIUGNOSCOD.rar
    the file giugnocristianl.rar ? mapped

  10. #60
    THE AVERAGE USER (OF)
    Date Of Registration
    Jul 2012
    Messages
    935
    Citazione Originally Written by isfedale82 Visualizza Messaggio
    hi I have a 147 jtd edc15c7 every now and then I by problems in the code, do not leave me to walk I wanted to do the scodifica total
    but after that, I quit the written code, but does not set into motion will place the file
    the original 0281010332 103366536il file scodificato (meucci or carsoftware)
    you have to calculate the cks of the file after it scodificato with the soft-dedicated. Titanium is not good for that operation, you need a soft-specific. Try with this file:
    File Allegati File Attachments

Page 6 of 9 PrimaBefore ... 45678 ... LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •