Golf V 105hp - DTC P2002 - Bosch EDC16U31

[emilground]

Hi guys, on this car I'm trying to find in the hex DTC P2002, which would be "efficiency particulate trap below threshold (bank 1) ". The error ? intermittent and sometimes do not show up for weeks. The drive when the error occurs, turn for a moment to the light engine, which immediately disappears without that there is no? the minimal drop in performance no? other problems. Leafing through the file with WinHex I found too many 2002.. if someone would know how to indicate which is which ? (if there is one that I found) in the map, that place with the ori?

Thanks to All

[Backgroop]

Hi guys, on this car I'm trying to find in the hex DTC P2002, which would be "efficiency particulate trap below threshold (bank 1) ". The error ? intermittent and sometimes do not show up for weeks. The drive when the error occurs, turn for a moment to the light engine, which immediately disappears without that there is no? the minimal drop in performance no? other problems. Leafing through the file with WinHex I found too many 2002.. if someone would know how to indicate which is which ? (if there is one that I found) in the map, that place with the ori?

Thanks to All

Apparently the problem ? the particulate filter?' but it is not recommended to delete it completely

[emilground]

The filter physically there? pi? on the car and does not take place any more? the postiniezioni why? have been eliminated. The only problem ? which occasionally appears in the P2002 and I would like to find it to remove it. I don't want to delete the entire table errors, but only that P2002. If anyone knows which one ? would be ideal, otherwise I'll have to try somewhere? how many times

[Backgroop]

The filter physically there? pi? on the car and does not take place any more? the postiniezioni why? have been eliminated. The only problem ? which occasionally appears in the P2002 and I would like to find it to remove it. I don't want to delete the entire table errors, but only that P2002. If anyone knows which one ? would be ideal, otherwise I'll have to try somewhere? how many times

With that software you've deleted the particulate filter, definitely where you see this error, the SW has not done a good job

[emilground]

With time but without deleting the DTC. It's all good except the sporadic light that disappears immediately. The mod file annex applies only to the 2002 that I have found with winhex and I would like to understand, what is it ? of those found (if there is)

[egs]

According to me you should do it with the sw or ask the on-line service of the forum, cos? are you sure that you deleted the fault code...

[munro]

before reading the ecu of the car in question, you have to reset the parameters of the fap?
if you did not even clearing the dtc in question after a p? if ripresenter? another...
usually the p2003....
however, if you have to do so?....return the file ori ecu...
clear from the diagnosis the value of the parameters fap without even moving the car....
proofread everything and redo the dpf off with the time you will see that acts as a...

[munro]

then, if you really want to delete the dtc know that in addition to the p-code you have to delete also the consideration vag-code dtc 5-digit...

[munro]

then, if you really want to delete the dtc know that in addition to the p-code you have to delete also the consideration vag-code dtc 5-digit...
it seems to me, should be the 18484 or something like that....
do a search with ******...

[munro]

opps error I posted two times the same answer...
sorry.... :P