2? Training course mapping units professionalchiptuning.
guys as the title the professionalchiptuning seen the success of the first course conducted about 1 month ago and seen the many requests from you has decided to do the 2? course,we decided to rearrange a training course of 2 days in both theory and practice in rome, our capital, given that the requests are scattered throughout italy, and it is the best compromise for all. the professionalchiptuning and is now present on the market in the field of reprogramming ecus,delete, dpf/fap,egr delete,delete dtc,solution start hot vag group,courses,support, and more for about 10 years.
copy of the program below:
THE COURSE OF REMAPPING (PROFESSIONALCHIPTUNING) WITH A DURATION OF 2 DAYS THEORY + PRACTICE +2 LUNCHES + FREE SMALL GADGET + CERTIFICATE OF PARTICIPATION + THE POSSIBILITY OF ASSISTANCE AND EQUIPMENT.
THE COURSE OF REMAPPING:
THE COURSE OF REMAPPING THE DURATION OF 2 DAYS THAT HAS NO LIMITS on the TIME TO EXPIRATION,LIMITS OF INTERRUPTION FOR ANY DOUBTS AND QUESTIONS YOU WILL FINALLY have THE CHANCE TO START editing A FILE STARTING FROM the ORIGINAL READ BY the MACHINE WITH The APPROPRIATE ATTREZZATURA.AVETE UNDERSTOOD IN TWO DAYS, WE GUARANTEE THAT YOU will be trained TO 100% TO DO ALL THAT UNTIL THE DAY BEFORE it WAS TABOO ACQUIRING YEARS OF EXPERIENCE in THE FIELD.
-1? DAY (THEORY):
IN THE COURSE, YOU WILL BE EXPLAINED AND ALL THE OPERATION AND USE OF SOFTWARE FOR PROCESSING AND IS THE MOST IMPORTANT THING IS THAT HOW,WHERE AND WHY TO EDIT THE FILE, AND ROUGHLY WHAT ARE THE ADDRESSES, THEN THE MAPS THAT THE SOFTWARE WILL INDICATE AND INTERPRET SOME OF THE REAL VALUES,IN ADDITION, THERE WILL BE EXPLAINED HOW TO ACT IN CASE OF CAR WITH AUTOMATIC TRANSMISSION,CAR, WITH DPF,HOW TO SOLVE ANY PROBLEMS OF VARIOUS FAILURES AND HOW TO MOVE FROM STEP ACCORDING TO A POSSIBLE UPGRADE, AND WILL BE ALSO EXPLAINED WHAT IS THE CHECKSUM, AND AS MAKE SURE THAT YOU CALCULATED IN THE CORRECT MANNER IS ESSENTIAL TO THE RECOVERY OF THE VEHICLE AFTER THE CHANGE. DURING THE COURSE WE WILL EXAMINE THE MANAGEMENT OF THE BOSCH EDC15,EDC16,EDC17,1.3MJET COMMON RAIL AND INJECTOR POMPA.NEL COURSE WILL BE EXPLAINED IS THE CHANGE IN THE MODE OF A TABLE (REAL VALUES), AND BOTH THE EDIT MODE GRAPHICS (2D). AT THE END OF THE COURSE AFTER YOU HAVE COMPLETED THE LESSON AND TOOK ALL ARE COMPLETELY THE NOTES OF THE CASE, AS WE WILL HELP YOU WRITE NEXT TO YOU IN THE MEANTIME, READ THE DIFFERENCES BETWEEN EDC15-EDC16-EDC17,MARELLI 1.3MJET,COMMON RAIL AND THE INJECTOR PUMP THAT THE CAR IS MORE WIDESPREAD IN CIRCULATION BE YOURSELF AND YOU DO A REMAPPING STARTING FROM THE ORIGINAL WHICH AT THE END WILL BE ANALYZED AND POSSIBLY DISCUSSED WITH YOU TO UNDERSTAND IF THERE WERE ERRORS,ALSO IT WILL BE EXPLAINED HOW TO EXCLUDE THE EGR VALVE IS ON THE OLD MANAGEMENT EDC15 THAT NEW MANAGEMENT EDC16-EDC17 AND HOW TO SOLVE THE PROBLEM OF RESUMPTION IN THE HEAT OF THE VAG GROUP.
-2? DAY (PRACTICE):
AFTER you HAVE FINISHED THE THEORY,WRITTEN ALL COMPLETELY CLIPBOARD NECESSARY WE go TO PRACTICE WHERE YOU will BE SHOWN HOW to INHIBIT The ANTITUNING OF MODERN control UNITS BOSCH EDC17 WITH THIS PROTECTION,YOU will PROCEED WITH THE PRACTICAL DEMONSTRATION ON HOW to OPEN THE ECU TO TOUR WITHOUT DAMAGING them, AND we WILL SEE ALL THE VARIOUS TECHNIQUES OF WORKING WITH VARIOUS TOOLS TYPE BDM TRICORE AND BOOT,then YOU WILL do A READ-MODIFY-WRITE ON A CAR COMPLETING THE WHOLE thing,of COURSE THERE will be MORE OF A TECHNICIAN READY TO ANSWER YOUR ANY QUESTIONS OR CONCERNS AT YOUR DISPOSAL.
-PROCESSING SOFTWARE:
WITH THE PROCESSING SOFTWARE, YOU CAN RE-MAP A FILE OF ANY VEHICLE SUCH AS CAR,MOTORCYCLE,TRUCK,TRACTOR OR VESSEL THAT IS COMPATIBLE WITH IT,THE SOFTWARE WILL PROVIDE YOU WITH ALL POTENTIAL ADDRESSES THAT YOU CAN GO TO MODIFIARE TO YOUR LIKING, AND ON THE BASIS OF WHAT AND HOW YOU WANT TO GET THE TYPE:
TURBO PRESSURE,LIMITERS,TORQUE,FUEL INJECTION,RAIL PRESSURE,ADVANCES,EGR VALVE,REV LIMITERS,SURGE SPEED, ETC) .THE SOFTWARE ONCE YOU HAVE FINISHED EDITING THE FILE DURING THE SAVE OF THE SAME WILL CALCULATE AUTOMATICALLY THE CHECKSUM THAT SERVES TO START THE VEHICLE CHANGED ONCE REWRITTEN TO THE FILE. WITH THIS SOFTWARE, you CAN EDIT THE FILE AT YOUR LEISURE IN the MODE 3D,GRID AND 2D, AND THEN re-CALIBRATE ALL THE PARAMETERS IMPROVING The DELIVERY IN the ARC OF ALL THE RPM .
The POSSIBILITY FOR PROBLEMS OF INEXPERIENCE OR CONCERNS OF the FIRST PERIOD OF ACTIVITY A TECHNICAL APPOINTMENT WILL be DIRECTLY IN YOUR WORKSHOP AND it will lead YOU TO carry out ALL of THE PRE-AND POST-MAPPING IN DIFFERENT PARTS Of ITALY.
FOR THOSE WHO WANT TO PARTICIPATE PLEASE SEND A ***** WITH NICKNAME AND CELL NUMBER,WE ALL REMEMBER HOW IT WAS WITH THE 1? THE COURSE THAT THIS WILL BE A LIMITED NUMBER OF BRIDGES TO ENSURE THE QUALITY OF THE SAME.
FOR INFO YOU CAN CONTACT US AT :
*****: INFO*PROFESSIONALCHIPTUNING.NET
Originally Written by michele30
