Page 35 of 55 PrimaBefore ... 25333435363745 ... LastUltima
Results from 341 to 350 of 541

Discussion: EDC16C - impariamola!

  1. #341
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    216
    Citazione Originally Written by ducati83 Visualizza Messaggio
    no one knows give me more details???
    ? only on the basis of the temperature of the water, the temperature of the exhaust gas doesn't matter in this case. The exhaust gas can reach up to 900 degrees and more? on modified cars, it would not make sense to make a comparison with the temperature of the water.

  2. #342
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    216
    Citazione Originally Written by jovandj Visualizza Messaggio
    I will
    I change it in my opinion there is not anything even why? begins to correct only with very high temperatures in which ? better that there is a bit of a limitation.
    Cos? like any other limiter according to the temperatures should not be made to the team, but only raised where ? necessary.

  3. #343
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    The resort
    prov pescara
    Messages
    392
    Guys but copy the lambda of 1.9 140cv edc16c8 that and a little more forgiving of the edc16c39 on the 39 fact can create some damage? ?
    The power is nothing without control

  4. #344
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    216
    Citazione Originally Written by jovandj Visualizza Messaggio
    Guys but copy the lambda of 1.9 140cv edc16c8 that and a little more forgiving of the edc16c39 on the 39 fact can create some damage? ?
    Just redo your as you want

  5. #345
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    The resort
    prov pescara
    Messages
    392
    In that sense, sorry? ?
    The power is nothing without control

  6. #346
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    216
    Citazione Originally Written by jovandj Visualizza Messaggio
    In that sense, sorry? ?
    If you want the lambda you can also put all in 1, all set to 0.8, the whole of 1.1. Depends on how much you want to limit and how much you want to smoke..
    You could raise all the limiters diesel and map the pedal so much, and then the limits only of the lambda to how and where you want. Just get 2 calculations with a log and decide how much to inject each of the various engine rpm.

  7. #347
    THE AVERAGE USER L'avatar di Errecinque
    Date Of Registration
    Mar 2014
    Messages
    909
    Citazione Originally Written by jacktheripper2 Visualizza Messaggio
    If you want the lambda you can also put all in 1, all set to 0.8, the whole of 1.1. Depends on how much you want to limit and how much you want to smoke..
    You could raise all the limiters diesel and map the pedal so much, and then the limits only of the lambda to how and where you want. Just get 2 calculations with a log and decide how much to inject each of the various engine rpm.
    You say that it's okay to give in the whole table
    The same value? Why? in the ori ? we say a scalar depending on the conditions.

  8. #348
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    The resort
    prov pescara
    Messages
    392
    No I agree I don't want to create a locomotive, coal pero seeing that the euro3 has a map fumes more permissive, I was wondering if it was possible to copy and paste it to see if it improved something, but without doing damage, I have already copied to other maps of the ducati corse to have a thing almost official and I have to say that as fuel consumption and improved performance as well as
    The power is nothing without control

  9. #349
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    216
    Citazione Originally Written by Errecinque Visualizza Messaggio
    You say that it's okay to give in the whole table
    The same value? Why? in the ori ? we say a scalar depending on the conditions.
    You can also set the same value if you want. Definitely the most? the lower the lambda pi? allow to inject diesel fuel, so it is up to you to decide how much and where to put it down.

    Citazione Originally Written by jovandj Visualizza Messaggio
    No I agree I don't want to create a locomotive, coal pero seeing that the euro3 has a map fumes more permissive, I was wondering if it was possible to copy and paste it to see if it improved something, but without doing damage, I have already copied to other maps of the ducati corse to have a thing almost official and I have to say that as fuel consumption and improved performance as well as
    Sorry but you what car do you have? Mica, you can copy maps from other cars cos? in the case just because? pi? recent. Do you know that Ducati corse has injectors that are different from yours? You know that's not you can then copy those times of injection and the related advances? I will not recommend to copy maps from other cars, facts, and you'll see that you can do much better.

  10. #350
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    The resort
    prov pescara
    Messages
    392
    Sorry wait not that they are ill-equipped I c I a gt 150 hp euro 4 2007 removed the egr and dpf swirl I copied what you can copy the ducati corse I know that has the injectors, and then vary the advance and tinj
    The power is nothing without control

Page 35 of 55 PrimaBefore ... 25333435363745 ... LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •