EDC16C - impariamola!

[ducati83]

I forgot: to copy an image of the pc...go on the visualization of titanium, for example, press CTRL+print screen, then open paint and click paste and save as a jpeg.

[Errecinque]

to insert the screen do post advanced click on the attachment, select the file and click the done button....then places the comment....

This I know but the problem ? I can't save in jpeg, the image of the screen taken with the key "STAMP" .I can paste it only on word

[Errecinque]

I forgot: to copy an image of the pc...go on the visualization of titanium, for example, press CTRL+print screen, then open paint and click paste and save as a jpeg.

Great!!!! the visa after my reply..... THANKS

[Errecinque]

These are the ones as a function of temperature, and are just the facts cos???

Screen lim IQ fT.jpg

[SandroMarciano]

yes, but you can also just change the first value of each curve is that ? referred to 90? the temperature of the liquid refrigerant

[jovandj]

I can't see the picture but I remember that they were the first values refer to a temperature of 90c to unlock precisely the lim iq to the desired value, then the ec-n, and a more forward-scrolling 2d and reported to the pump and rail from the damos, and then another, referring always to the rail

[Errecinque]

? an IQ limiter that works on the basis of a factor, for the change you need to know is that 8192 ? the value that the ecu uses in optimum operating conditions, so you need to increase the values relative to 8192.

Increase of the ridges that have pi values? low-8192-not the whole curve to the team right? But why? the first three curves that are part of the same map are 10000?

[jovandj]

That limiter and conditions vehicle-rpm=lim iq in mm3 if I'm not mistaken the e4 and 77mm3 so if you have 100mm3 should be a edc16c8 however, indicates that the limitation and 100mm3 for the first 3 steps in terms of rpm

[Errecinque]

That limiter and conditions vehicle-rpm=lim iq in mm3 if I'm not mistaken the e4 and 77mm3 so if you have 100mm3 should be a edc16c8 however, indicates that the limitation and 100mm3 for the first 3 steps in terms of rpm

But then you have to unlock them on all the curves (my goal 80mm3) or just the ones related to the medium and high revs?

[ducati83]

you've reported me for? the map can handle up to a 130?C so it is up to you by the exhaust gas, but relative to the engine temperature....the exhaust gas or, better, the temperatures of the turbine certainly do not stop at 130?C....so I guess that makes a kind of comparison between the temperature of the exhaust gas and the relations to the temperature of the engine...or better liquid engine....what do you think?

no one knows give me more details???