E.g. the ecu locked and ripristno bdm info

[michele30]

I have a doubt and I don't know how to solve this problem if it were to happen.
we es an ecu 1.3 mjet we put that in the process of writing it blocks and does not make me the most to do the recovery for writing it.
to maybe write it in bdm, i.e. with the file that is read on the serial line as I take the file of the m58bw... to put it in the bdm?
I guess I have to cut it with the ecm, but c'? a logical guess, right?

[Gia]

file from 2,048 mb

[legendaryslave]

I have a doubt and I don't know how to solve this problem if it were to happen.
we es an ecu 1.3 mjet we put that in the process of writing it blocks and does not make me the most to do the recovery for writing it.
to maybe write it in bdm, i.e. with the file that is read on the serial line as I take the file of the m58bw... to put it in the bdm?
I guess I have to cut it with the ecm, but c'? a logical guess, right?

no, you can't write the serial reading in the bdm, it includes only the part relating to the maps of management of the engine or find a reading bdm same hw and soft or rebuild the file from the serial reading and more reading bdm after the block

[michele30]

Well then I have to have a file that is read on the serial line, then one or bdm or read what the ecu is locked and I have to rebuild it
but ? difficult to do this operation?

[michele30]

Well then I have to have a file that is read on the serial line, then one or bdm or read what the ecu is locked and I have to rebuild it
but ? difficult to do this operation?

[sportknight]

the serial reading of the marelli if I remember correctly, has no differences with the bdm,I could be wrong, but I remember writing in serial reading bdm
now I'm not at home and so I can't check but it seems to me that both cos

[Gia]

I know that you're wrong

[marcogti]

I sincerely have not tried, but it seems to me that, for example, on edc16c39 the reading done in the bdm from the cock then allows you to write always with the cock in the serial, has anyone tried it, and I can? confirm ?

[jolidj]

the theory and just that. read what you and left in a flash and the build through the bed in the serial.
or if you find a beckup complete.
always hoping that the e2p and remained healthy.
nn and difficult to reconstruct all just a bit of practice, cut-and-paste .

[ema74]

in 1.3 the reading from the serial port and of 448kb and not you can write it down in the bdm, why? the complete file, and 2mb