the silicone does not conduct current,I did some tests,? a good isolatedOriginally Written by sportknight
the silicone does not conduct current,I did some tests,? a good isolated
Could go well with the red paste? Compared to the black should only change the resistance to heat.I recommend the simple butyl glue, for indenrci the one that is used on the inside of the door panels to secure the sheet of polionda or similar to the frame of the door. The island from damp, never hardens, cut off with little force and without the aid of special tools (can you? also, do not heat) IMHO. I have sealed an aquarium containing oil dialettrico with a PC running set (experiments of Sunday) and has held three years before the smontassi!
But the butyl glue type as that of the doors of which you speak, V.V. where you could find?
I found a pasta that is a fairy-tale grey for electronic components aquistabile in any electronics show with a ridiculously low price
the better solution ? the butyl . It does away with ease? and the island like the black pasta. With the heat improves its characteristics. Not ? need to clean to put it why? the butyl the same firm all the leftovers of the old glue. They sell it in strips ? nice for the price.
a question I have always had but which I never removed,that sort of thermal paste that c'? on the pcb of the ecu,should be restored? and if so, how?
what's the use? island those contacts?onon it seems to me,why? I see them uncovered,but...boooooooo
until now I always closed it without thinking,warmed myself again the ecu and via
is used to dissipate heat
so better to restore it?the thermal paste that you put pole cpu of the pc is fine?
according to me you can? do at least,all the ones made by me a long time have never had problems
even I,ma ? a doubt that I ? always remained
Write permission
Quote