If the sw that I use pu? serve to carry out tests of the functioning I can share with you, a forum allowing!
Originally Written by m999
Can I his MPPS have a SW maybe more? up-to-date... well!! I would say that you can't certainly complain of the thing!!
M999
I struggle to understand what you mean and what you have done. Try to be more? clear.
- my MPPS reads and writes correctly, but it is not the cks; your the ago?
- you have to read the file with MPPS then you have changed the startup message; and with what sw;
- have you written to the map file with MPPS, but it gave you an error; as you correct?
hello
I'm sorry if I was not clear! I try to describe all of the steps taken.
First of all when I tried to read the original map of the mpps I returned a error (kind of improper)which I solved as suggested by m999 changing the model of the bike. In my case, instead of selecting hypermotard 1100, I have selected the Hyper 1100s, fitted with the same ecu, and the reading ? come to a good end!
Having the files to 320kb just read, I changed the welcome message from the hex with the HxD, and save.
Ready for programming, I connect mpps to the bike, launch the soft and with all the default settings and the bike selected as read, I do first IDECU, which is read, and then Write. At this point, the mpps, before starting the erase, and then write, I issue an error and invites me always to contact via **** support.
I will make an attempt to reciprocate the model of the bike and I, this time, the hyper 1100 (the cio? my role model), re-writing and re-error.
At this point, before I disconnect everything and ask you the question, I put the bike on a hypermotard 1100S, and I clicked on the key chk of the mpps, the software asked me before the original file, and I loaded the bed, and then he asked me the modified file, and I loaded the one that is saved with the HxD with the welcome message changed. The mpps generated me a new file, I assume with the modified checksum, cos? I repeated the scripture with this last file, and ? come to a good end without any error, time 20-25sec and the ecu ? been rescheduled!
I hope I was clear in all my steps, now I would like to know from you how it behaves when you click on the button chk of mpps? Not asking you for ori and mod to correct the checksum?
Proof of what has been done:
Original message: HYPER RACING
Message MODIFIED: DIRDAN HYPER
Very clear; this procedure I had heard it only in one occasion, but I haven't ever given very much the case just because? ? was an isolated case.
If you attach the two files that you used (the ori and the modified first of the cks) I try with one of my ECU "guinea pig) and I'll tell you what happens.
The I enclose in this discussion?
The original one, which ? been verified and you have already? posted in the other thread, then do not attach; and the modified one with the HxD (without cks), as a file "tutorial", and by correct, I think that it is better to attach it here, unless other directions of the moderators.
Here is the modified file with HxD:
MyHymTermi22.DRD.rar
Mauro how would you try, just for curiosity?, in serial with the mpps or at the bench with the other equipment?
I will add that I noticed that by making the correction of the checksum of the modified file with HxD, via chk corrector and comparing it with the one generatomi from mpps, are the same. So I think that the mpps something correct!
Write permission
Quote