deleting the egr fiat punto evo mjd8

[freddyecu]

hi all, I have just removed the egr control from a grande punto evo but before loading it in the ecu, I wanted to ask you if made the right way... thank you in advance

[ugoboss]

the bit that you have changed to 1DCC0A what it is.

[cinqueturbo]

I see there are many Bit-modati..
it was not a single Bit of the switch?
I wonder, of course,
why? do not or never made it I know the solution,
to hear you say you talk about the 1-Bit switch..

[Backgroop]

I see there are many Bit-modati..
it was not a single Bit of the switch?
I wonder, of course,
why? do not or never made it I know the solution,
to hear you say you talk about the 1-Bit switch..

This is not a real swict, but a fraud to management, in practice, you move a bit which limits the voltage below the threshold of the egr valve is this? the voltage at which it begins to work the valve, to look for the value 37e9 called battery voltage threshold for shut-off enabling this value, multiplied by the rapport or conversion equal to 0,000421 us 6-volt, just change the value so that it may rise above the 14,60 volt and the EGR Valve will stop? of work..

[ugoboss]

I see there are many Bit-modati..
it was not a single Bit of the switch?
I wonder, of course,
why? do not or never made it I know the solution,
to hear you say you talk about the 1-Bit switch..

he also made the change to the exclusion of the fap, but that bit before the egr I do not know.

[cinqueturbo]

This is not a real swict, but a fraud to management, in practice, you move a bit which limits the voltage below the threshold of the egr valve is this? the voltage at which it begins to work the valve, to look for the value 37e9 called battery voltage threshold for shut-off enabling this value, multiplied by the rapport or conversion equal to 0,000421 us 6-volt, just change the value so that it may rise above the 14,60 volt and the EGR Valve will stop? of work..

Good explanation, thanks..
why? not put the solution in the section dedicated seen that is missing with the address and screen?
or still in the test for the final solution?

[Backgroop]

Good explanation, thanks..
why? not put the solution in the section dedicated seen that is missing with the address and screen?
or still in the test for the final solution?

No this is the ultimate solution, I do a post about them and the place in the suitable section of

[leandro89]

mine was just a question, why put it in a section where only the chosen few can use, this solution runs already for long time, and it is on many forums and nothing secret, just like many other things, I know that now I will say that, here, the rules are these, but then again it was only a question, so much so that it is not the only solution to this machine, you cinqueturbo that you are a part of the group**** try to make you do the closing egr with that sw and then see the difference.

section off limit exists because? c'? a lot of material to that ? was the result of study and tests, to prevent anyone who has access ? created this section, the off topic closed. do not go beyond

[ugoboss]

then as you say the solution Backgroop and wrong..

Sorry leonardo, while you closed the off topic, I was still writing to ugoboss..

I do not me, I'm absolutely taking it with no one, and I have absolutely said that the solution of Backgroop wrong , I only said that is not the only one, why not read what people write. closed topic.

[leandro89]

discussion cleaned up, we don't argue