Page 1 of 2 12 LastUltima
Results 1 to 10 of 13
  1. #1
    BEGINNER
    Date Of Registration
    Feb 2014
    The resort
    arcevia
    Messages
    7

    MJD6JF software code does not match

    I read with galletto 1260 ecu of my panda cross mjd6jf
    and I noticed that the code hardware and software do not match.
    Exactly on the label :
    MJD6JF/HW02A/1092-S464
    panda 1.3 SDE EV4 EODB 4WD

    while ecu data with the cock :
    MJD6JF01A 1098S454

    I bought this car used a few months ago and I wanted to understand what caused this difference.
    greetings marco

  2. #2
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    it's already happened to many others, this difference on the fiat panda, are outputs that's right , but I warn you that many have locked the ecu in writing with these numbers.
    ugo ---- president A.E.P.

  3. #3
    BEGINNER
    Date Of Registration
    Feb 2014
    The resort
    arcevia
    Messages
    7
    looking on the forums I saw that the problem ? in the hardware code 02A 01A by hex edit
    For the difference of the software code will be a update ?

  4. #4
    THE AVERAGE USER (OF)
    Date Of Registration
    Nov 2012
    Messages
    1,280
    You ? happened to me, but with another tool. In writing it ? locked the ecu, I don't remember if I had to take it in BDM or have I got another ecu.

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    The resort
    Piacenza
    Messages
    181
    but when you block write yes you can with the function recoveri of the kess

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Jun 2012
    Messages
    329
    it depends. sometimes the resume. the flaw in the bdm and go quiet

  7. #7
    THE ACTIVE USER
    Date Of Registration
    Mar 2013
    The resort
    Palermo, sicily
    Messages
    1,128
    to me ? success as well with mpps, write, run at 100% but the car would not start, rewritten by changing the bit in the mode? recovery directly and everything ? smooth yarn

  8. #8
    BEGINNER
    Date Of Registration
    Feb 2014
    The resort
    arcevia
    Messages
    7
    Thanks to all for the advice, for the bdm are not the jogging and I would not risk my ecu. I think that to try I ought to find a ecu guinea pig.
    I don't know if I ought to work on the file ori downloaded from the ecu MJD6JF01A 1098S454, or to a file ori found on the net MJD6JF/HW02A/1092-S464 that corresponds to the code of the ECU.
    I think, however, encoding inniettori and key remain in the eeprom, however, I have read and, therefore, also uploading the file ori found in the network, the drive should still go.

  9. #9
    THE AVERAGE USER L'avatar di cinqueturbo
    Date Of Registration
    Sep 2012
    The resort
    The Milky Way
    Messages
    2,407
    I'll write your file with SW in the ECU to the bed, and not the one on the label..
    then MJD6JF01A 1098S454..
    "The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."

  10. #10
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    also, if you write the file, and the blocks just do the hex editing,rewriting of the file and the machine part.
    Last edited by msport (exil77grande); 22-03-2014 to 12:52
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

Page 1 of 2 12 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •