Opinion the map C2 VTS

[giannimini]

Relax the advance means to me to delay it. ? a way of saying.
To have more? performance you must anticipate, therefore, to place a lower value.
If you put values in excess of the advance of the relax, delays sorry

At full load and zoned I'll say the same Word, it changes both the tables ;-)

The tables of the injection by reducing the values fattening and raising them smagrisci.

I can't see the map, but it will change the values on the basis of how it goes in the machine

;-)

[Macchinista]

the fuel mixture ? defined by a single map, both at full load and in split. in the sense that with a single map define everything from the minimum rpm and load at maximum rpm and load.
the map zoned ? an invention of the ecm , in fact? need to another.

At full load and zoned I'll say the same Word, it changes both the tables ;-)
;-)

What it means sergiot, ? that ecm titanium as the major party of the times by the names "standard" to its maps. then where you see it written: "iniezxione at full load" or "injection, split", no ? said that it is the truth. I hope I explained myself!

[sergiot]

What it means sergiot, ? that ecm titanium as the major party of the times by the names "standard" to its maps. then where you see it written: "iniezxione at full load" or "injection, split", no ? said that it is the truth. I hope I explained myself!

? exactly this is my indication

[giannimini]

Has ok ok, then change only injection at full load and the split that it serves another left for xom'? for now

However, I in my small way I try to help him, even why? sucuramente helps you say to each other, one thing you a another

Can you map the network drive and have there? that czechs without making a mess

Ecm does not ? to the top but unfortunately those who do not have other proganni have to settle

[fabiovts88]

so guys if I have not misunderstood the true map for the fuel mixture ? the full load right?

guys looking at the map is made by my mapper, I emaciated to a high rpm, what does that mean that the car should be less on high rpm? has emaciated 1 point I cn this map I have the problem that exceeded 6500 rpm seems to go what should I make you fat or lean more?

guys I put the maps
fabio rp ? one of the mapper
the other ? the one I made give me a tip

[giannimini]

If you feel like the jacket you might try to put on weight. The Cio? if you notice that up to 5000 you of the values and then to 6000 change drastically try to change the values to 6000 as they are up to 5000

If from 1000 to 5000 map tallow continues to put on weight even at 6000 what is the meaning of lean?

Even why? the values that you have 6000, you will find yourself up to the limiter, so that lean, you should grease

As soon as they are on the pc, I open the map that you posted and a look

[fabiovts88]

let me know gianni I know that smagrendo you have the best performance

[Macchinista]

let me know gianni I know that smagrendo you have the best performance

This ? true, but then you raise the temperature in the room as far as I know, and I know that the original map are already? enough to the limit to it is also a matter of consumption.

[fabiovts88]

in fact, in one of the mapper ? was smagrita of a point on the high rpm 6.000

[giannimini]

In fact, already? the original should be very lean and pull of advances

For best performance, you have the mixture right

Too lean is bad the machine on the bike 2t if you remember when toglievi the air filter it was empty, absurd, and changed the main jet to remember?

Also good on the car ? cos?, too fat and too skinny, bad performance
Carburation good, verging a bit on the skinny (and I mean a little) performance and fuel consumption and the best

If you don't read the lambda, you can't see it ever

You could see the candles but not ? a scooter, usually if they are white you're skinny, hazelnut ok and dark brown grease.

But to try you should turn off the machine at the maximum speed almost see that you seem dull, if you feel the test I would not do that ever.

With the Vespone I do this but with the car not me I would risk never haha

Good luck ;-)

Consider that if the power off at the minimum read the idle mixture. Cos? via