I can not read the edc15p

[kingsnake]

Also mine was a quality yet the K line was not working. The only resistance was different that detached from the other by 10 khom... If this on your own ? correct lascierei all com'?!!

I did not understand that from 10 kohm where it is located, whether ? a smd resistor or not

[Macchinista]

You ? a restitenza smd. Looking at the motherboard of your cock with the capacitors toward the top. the socket for the power supply vesrso the left and the usb to the right, to the right of the relay ir? big (yellow in theory) the first above the resistance that blue big. that should be about 10 khom and should be replaced with a 3.9 khom

[kingsnake]

You ? a restitenza smd. Looking at the motherboard of your cock with the capacitors toward the top. the socket for the power supply vesrso the left and the usb to the right, to the right of the relay ir? big (yellow in theory) the first above the resistance that blue big. that should be about 10 khom and should be replaced with a 3.9 khom

I saw my ? mount a 10k resistor,in the meantime, I replaced the crystal with a stainless steel 2-pin, but replacing the resistance to what I'm going to improve?

Anyway thanks for the help :-)

[Macchinista]

I saw my ? mount a 10k resistor,in the meantime, I replaced the crystal with a stainless steel 2-pin, but replacing the resistance to what I'm going to improve?

With that strength you should improve problems with the line K that with some of the units or, like me, just did not work neither read nor write.

[sisco]

my after changing the resistor 10 k with the 3.9 began to read the ms 6.2 in the k line before, nothing

[kingsnake]

I did a p? of phone calls to some friends for a resistor 3.9 kohm, but nothing, I will have to? do 60 miles to fetch a component from the value of a penny around, however, the next week I get the 53, and I hope that everything goes well, in the event that even that gives me trouble c'? a thread here that talks about v53?

Ms 6.2,that the machine and the control unit are we talking about?

[passione motori]

I did a p? of phone calls to some friends for a resistor 3.9 kohm, but nothing, I will have to? do 60 miles to fetch a component from the value of a penny around, however, the next week I get the 53, and I hope that everything goes well, in the event that even that gives me trouble c'? a thread here that talks about v53?

Hello, you can do it 7......

[sisco]

the ms 6.2 mounted on these vehicles, from what I know ,but it could also be fitted on others who do not know
Truck DAF CF75 CF75.250
Truck DAF CF75 CF75.310
Truck DAF CF75 CF75.360
Truck DAF CF85 CF85.340
Truck DAF CF85 CF85.380
Truck DAF CF85 CF85.430
Truck DAF CF85 CF85.480
Truck DAF XF95 XF95.380
Truck DAF XF95 XF95.430
Truck DAF XF95 XF95.480
Truck DAF XF95 XF95.530
Truck IVECO CURSOR 10 440
Truck IVECO CURSOR 10 440
Truck IVECO CURSOR 13 380
Truck IVECO CURSOR 13 440
Truck IVECO CURSOR 13 460
Truck IVECO CURSOR 13 480
Truck IVECO CURSOR 8 240
Truck IVECO CURSOR 8 270
Truck IVECO CURSOR 8 310
Truck IVECO CURSOR 8 352
Truck IVECO EUROTRAKKER 310
Truck IVECO EUROTRAKKER 380
Truck IVECO EUROTRAKKER 440
Truck IVECO STRALIS 10 430
Truck IVECO STRALIS 13 420
Truck IVECO STRALIS 13 480
Truck IVECO STRALIS 13 540
Truck IVECO STRALIS 8 352
Truck RENAULT MAGNUM AE 400
Truck RENAULT MAGNUM AE 440 440HP DXi12
Truck RENAULT MAGNUM AE 480
Truck SCANIA SERIES 4 114 PDE 340 HP
Truck SCANIA SERIES 4 114 PDE 380 HP
Truck SCANIA SERIES 4 124 PDE 400 HP
Truck SCANIA SERIES 4 124 PDE 420 HP
Truck SCANIA SERIES 4 164 PDE 480 HP
Truck SCANIA SERIES 4 164 PDE 580 HP

[kingsnake]

Ah that's why? I never heard of them, are truck

[kingsnake]

Hello, you can do it 7......

do you have it?

Cabbage I have not thought about!