Have I understood!
Unfortunately for? I will have to? use a "common" eprom programmer, let's say Willem, so I don't know whether to do this calculation of check! Works in the same way??
Have I understood!
Unfortunately for? I will have to? use a "common" eprom programmer, let's say Willem, so I don't know whether to do this calculation of check! Works in the same way??
not the willem or other dealer does not make the calculation of the checksum , only bdm , galletto 2 and the other is in the boot mode or the obd make the correction of the chk in writing but not on all
if you do not do the calculation of the chk the car does not start , only the iaw of the delta were
the 27c128 to speak , but still I pareggiavo manually
Understood... Then or does the ecm or anything? I don't know if it does or not...
Sorry, but when you buy one of those chips already? ready, to check how can it be corrected?? ? one thing that goes hand in hand with the eprom??
Last edited by msport (exil77grande); 07-09-2013 at 19:34
Good day, sorry if riesumo this post, but I just can't do the check properly, my map test, I tried to look for centalina in families checksum, but I can't find it for nothing, somebody, someone can? give me a hand? or a soft working??
maybe if you give info..............???????????????????????????????? ??????????????????????????????????? ? perfectly needless to write, I need a hand if you don't say what
Hello, the problem ? always the one described in the previous post, that is, st? trying to do some testing of the map for a golf4 gti, waiting to make my A3 always motorized AGU.
St? using ecm2001 (found on the net) and some time ago I sent out a test of the map MOD, that seemed to be able to go, but they told me that the checksum was not correct.
Practically from the ecm, in the boxes to the right of the file ori has a number cks, while the mod has a different one.... even if on size gives me the same numbers...
I also tried softwsare type checksum corrector, but the numbers never coincide... ? normal???
email the file
ori and mod
AGU1.rarok
file ori deleted
the primpo ? the ori the second mod, I'd also like to understand the procedure..
Last edited by leandro89; 25-02-2014 to 17:53
look at the number cks ? normal changes between the mod and the ori....*****s, both titanium winols the calculate automatically think that if you use the right driver it also does ecm
understood, but then ? correct the check??